Technical parameters of medical door leaf and door cover

Technical parameters of medical door leaf and door cover Technical parameters of medical door 1) Door leaf thickness (including edge opening) ≥ 40mm, 1mm aluminum alloy edge sealing added to the corners, original metal color ( oxidation treatment). 2) The door core adopts a high-density board grid structure, which requires no deformation, corrosion resistance, no cracks, and heat insulation. 3) The door panel is made of CPL fireproof and antibacterial board, which is required to be fireproof and antibacterial, high hardness, anti-collision, anti-scratch, wear-resistant, easy to clean, non-fading, the door surface is smooth and smooth, and the color is yellow maple wood grain color. 4) Stainless steel skirting boards are installed at the bottom of both inner and outer sides of the door panel. The skirting boards are double L-shaped groove edge sealed and the height of the skirting boards is 12cm. Technical parameters of medical door cover 1) The door cover has double veneer (moisture-proof layer) and the contact area between the cover plate and the ground is treated with wax and water separation, and a moisture-proof pad is provided at the bottom. 2) The base material of the door cover is made of waterproof and environmentally friendly materials, which have high waterproof treatment and moisture-proof performance. The cover board is made of multi-layer solid wood with a moisture-proof panel on the back. The main thickness is not less than 30mm and has moisture-proof function. 3) The door sealing edge must be fully enclosed and waterproof. Hospital ward door hardware accessories 1) Use high-quality stainless steel hinges. 2) Use high-quality stainless steel handle lock. 3) Stainless steel door stopper. Medical door installation requirements 1) The installation of indoor doors must be firm, regular, with small errors, and must be installed by professionals. Door hinges, locks and other hardware must be installed firmly to ensure durability. One-year free warranty and lifetime paid warranty service. 2) Before production, you must go to the site for verification to determine the actual size and quantity of the door frames, and obtain approval from the construction unit.