After installing the bedroom door in your home, what are your shortcomings and regrets? place?

My bedroom was renovated before The door has unknowingly stepped on a lot of pitfalls. It can be said that if I were asked to redecorate my bedroom door, I would do the following \”7 dos and 7 don\’ts\” and I would never do it again.

1. Don’t suck on the floor, but suck on the wall

Ground absorption, It looks very simple and high-end, but it is not that true at all in use. To be honest, when it comes to daily cleaning, it is really laborious to clean the floor vacuum, and after using it for a long time, the porcelain tiles will become very raw.

My personal The suggestion is that it is best to use wall vacuuming. Although it may seem a bit awkward, the daily cleaning and durability are really worth it. I just want to say, why not do it?

2. Do not use ordinary door locks but want silent locks

The old one The biggest problem with ordinary door locks is that there is a clang every time the door is closed, and the corners of the lock are easily scratched. I personally feel that this small detail affects the living experience.

Personal feeling, The magnetic silent door lock neitherYou spend more money, but the safety and quietness are also good. Every time you open and close the door, you feel much more comfortable. If you install a bedroom door, spend more money to install a silent magnetic door lock.

3. Door covers should not be spliced ​​at right angles but at 45 degrees

Home decoration As for door covers, I personally don’t recommend doing this kind of 90-degree splicing. It has a nice name called “Get Out of the Top”, but in fact it doesn’t look as good as its name. I always feel that the extra length is a bit awkward.

Door cover individual It is more recommended to make the kind of 45-degree splicing, which looks much better. After all, the squares fit perfectly and the sense of unity will be stronger. But be careful to pay attention to the size of the gaps. If the gaps are too large, it will look awkward.

4. Do not fill the door with honeycomb paper but have a mechanical structure of the bridge hole

My personal recommendation , don’t choose the kind of door filled with honeycomb paper, which is neither strong nor insulating and noise-reducing. There are not too many doors of this kind on the market now, but they are ridiculously cheap. The inside is still filled with this kind of door.

Try to choose Filling the mechanical structure of the bridge hole not only provides sound insulation and noise reduction, but also has good thermal insulation and stability. Of course, the budget will be increased accordingly. It is up to you to decide how to choose~

5. Do not use double and double hinges, but open hinges

Before installing the door , I always feel that this type of hinge fits perfectly and looks relatively high-end, so I blindly chose it, but in fact its load-bearing capacity is worse than that of ordinary hinges. I really don’t recommend it.

Ordinary flat Opening hinges are cheap and have strong load-bearing capacity. If the door is super high, why not add one to save worry and durability?

6. The thickness should not be 4CM but should be more than 4.5CM

I recommend not choosing a 4cm door leaf, preferably 4.5CM or above. The thinner the door leaf, the worse the sound insulation and thermal insulation performance. Personally, I feel that 4CM is still a bit too thin and not suitable for bedrooms.

If you renovate As for the bedroom door, I will definitely choose one with a height of 4.5cm or more. It is not only stable and strong in structure, but also has excellent thermal insulation capabilities. It is at least 4.5cm and is much more comfortable to use.

7. The material should not be pure solid wood but solid wood composite

Pure solid wood doors may feel stronger, but in actual use they are very easy to crack, and the price is really expensive. I personally feel that there is really no need to go there. Choose solid wood doors

Solid wood composite, I personally feel that multi-layer composite is more practical, strong and affordable. If I want to install another door in my home, I will definitely make this kind of solid wood composite.

<span style=\"color: No Do you know if you are doing the right thing at home?

(The picture comes from the Internet, if there is any infringement, it will be deleted immediately)