Shenzhen trackless suspended door production process

Trackless suspension doors, also known as trackless suspension doors, travel in the air, with no wheels touching the ground, no running tracks, and no need for pre-embedded guide rails. Widely used in factories, residential areas, communities and other places. Today Kaikaihong Technology will take you through the production process of trackless suspended doors

The production process of trackless suspended doors

1. Determine the materials:

The main materials used for suspension door customization generally include three aspects: aluminum profiles, steel materials, and hardware. The thickness, strength and oxide film of the aluminum profiles selected for good suspended door products generally meet national standards. For example, relevant national regulations require that the wall thickness of the aluminum profiles for suspended doors should be no less than 1.2mm, and the oxide film thickness Should reach 10 microns. Special steel is better than ordinary steel. In terms of safety, durability and safety, special steel is more reliable. In addition, stainless steel is better than aluminum for suspended door hardware, screws, hinges, etc.

2. Processing:

After the materials are determined, the suspended door is processed. A good suspended door product will be processed very finely, with smooth tangents and consistent angles. The main frame material is usually When the angle is 45 degrees or 90 degrees, there should be no obvious gaps during the splicing process. The sealing performance is good and the switch is smooth. If the processing is not qualified, there may be problems with the sealing properties.

3. Appearance:

When customizing a suspended door, everyone usually pays more attention to the appearance of the product and the decorative pattern of the glass, and underestimates the composite film on the surface of the suspended door. The composite film is formed by artificial oxidation film coloring. It is corrosion-resistant, wear-resistant, high-gloss, and also has a certain fire-proof function. Therefore, special attention must be paid to this when customizing floating doors.

4. Assembly:

Connect and assemble the profiles through connectors and screws according to the requirements of the construction drawings. There are three assembly methods for floating doors: 45° angle docking, right-angle docking and vertical docking. The connection between horizontal and vertical poles generally uses special connectors or aluminum angles, and then is fixed with screws, bolts or aluminum rivets.

In short, the production of suspended doors is different from the production of other products. What matters is the skill of the installation master. In order to ensure customizationRegarding the quality of suspended doors, it is recommended that you choose some manufacturers that are more reliable or worthy of everyone\’s trust for customization, so that the quality is more guaranteed.

Kamenhong Technology Co., Ltd. is a company that integrates intelligent products (retractable doors, suspended doors, Shenzhen electric doors, intelligent parking lot charging systems, access control management systems, transportation facilities, new assembled aluminum alloy parking sheds , booths, etc.), its products are widely used in real estate, properties, schools, large domestic and foreign-funded enterprises, and halls and guild halls.