Installation tutorial

Four-inlet assembly tutorial.

This model has four imports. When you receive it, it looks like this. There are two mesh pieces at the top and bottom, two mesh pieces at the top and bottom, and two long movable doors. It is the front and rear, and the two small trap doors are the left and right.

·When installing, install these four inlets first, and directly use cable ties to fix the four sides. This is one of the sides. Fix it and use ties directly. Pass the belt through this eye and fix it. You can fix it from the inside of the eye just now, you can fix it directly outside the frame, you can also tighten it directly outside the frame, it is very strong.

·After the four movable doors are fixed, be sure to remember that the bottom is level with the movable door. Never place the When the mesh is stuck here, be sure not to get stuck in. The front, rear, left, and right sides are flush with the removable door.

·After placing the mesh, pass a cable tie through it from underneath and tighten it. The cable tie has the same function as the iron wire, and they are both used to fix the cage. Fix it in sequence, the denser and stronger the fixation, just fix it, this is fixation, fix the edges, just tighten the edges directly, so that the bottom is fixed.

·The top is also laid flat like this, and this side is also laid flat, and it is tied with a tie. The same is true for the iron wire. The top is aligned like this, and tied with a tie. The tie is to tie it in four positions, and you can tie it in more places. A little, a little stronger, just pull the top like this and tighten it.

·The small door is placed at the top and directly closed to one side, so that it is more convenient to take it out. The main reason is that it is more convenient to take things in and out.