Describe the structural characteristics of industrial doors in detail

Industrial DoorIt is the door of the factory. Of course, it can also be used in enterprises, construction sites, warehouses, logistics parks and other places. Industrial doors are usually relatively wide, ranging from a few meters to dozens of meters, and can block both vehicles and people. Industrial doors are generally made of relatively hard alloy materials. At the same time, the surface has undergone a special baking process and surface treatment process, which makes the industrial doors have very good anti-oxidation and corrosion resistance. Generally, rain, snow, wind and sun will not damage the door body. It can operate normally even in harsh environments. This article will introduce the structural characteristics of industrial doors in detail.

Industrial doors are mainly divided into segments The structural characteristics of sliding doors, swing doors, hanging doors and sliding doors are as follows：

1.Segment sliding door: The segment sliding door has fence, mountain and tree shapes There are six door styles: , louver, copper coin and square. The segment sliding door can be assembled and operated simultaneously with license plate recognition. Before the vehicle enters, the door body can automatically determine whether to open based on different signals. The segment sliding door has a 12.1-inch high-definition LCD screen, which can customize the display content and is waterproof, sun-proof, and leak-proof. The sliding rail guide wheel assembly is designed between the door rows, which ensures smooth operation, stable balance, no deflection and good flatness. The door body is equipped with a manual emergency button to respond to emergencies in a timely manner, to ensure the safety of pedestrians and vehicles. The door body can be equipped with reflective film and ambient lights to provide better warning, reminder, lighting and aesthetic effects at night. The bottom of the sliding door is made of solid cast aluminum rollers. The carbon steel balls have very strong bearing capacity and run smoothly while being wear-resistant and anti-skid. The bottom of the door body adopts a wind hook design, so that the door body chassis is wider and has better wind resistance. I-beam and aluminum alloy guide rails can be installed.

2.Singing doors: Swinging doors have mountains, coins, squares, and fences and five door styles with louvers. The door body is made of high-strength aluminum alloy profiles, and the surface adopts electrostatic powder spraying and baking process.The surface has strong corrosion resistance; at the same time, the vertical rod is equipped with vertical rod fixing sleeves on the upper and lower sides, making it more stable and firm. The top of the door is made of steel pulleys, which have a small friction coefficient, high hardness, high rigidity, and high wear resistance, ensuring that the door body slides smoothly and freely. The door body is equipped with an ambient light and an LCD screen. The top of the display box is designed with a constantly bright yellow ambient light. Its 12.1-inch high-definition LCD screen can display customized content. The door body is equipped with a leakage switch. When the circuit fails and excessive current is generated, operating the leakage switch can quickly cut off the power supply to achieve short-circuit protection and effectively improve the safety factor. The bottom of the door uses solid cast aluminum rollers with embedded high-carbon chromium bearings and steel balls, which have strong load-bearing capacity and smooth sliding. At the same time, the surface of the wheel body is covered with rubber to make the door sliding more stable. The top of the control box is designed with red and blue strobe lights to provide a better safety warning. The bottom beam of the door body can be installed with a yellow ambient light, which adopts photosensitive control and automatically turns off during the day and turns on at night, providing a better reminder and aesthetic effect.

Ankuai T902 sliding sliding door

Ankuai T902 sliding sliding door

3.Hang door: The hanging door has five door styles: fence, tree, copper coin, square and mountain. The door body is made of high-strength aviation aluminum alloy, and the surface adopts outdoor powder electrostatic paint process, which has strong corrosion resistance; the vertical pole is reinforced with upper and lower fixed sleeves, making it more stable and non-swaying. The top of the door uses nylon pulleys with a small friction coefficient to ensure stable door operation, good load-bearing capacity and strong impact resistance. The bottom of the door uses a 6-12mm thickened bottom beam, which is made of high-strength aviation aluminum alloy. It has good overall bending resistance, high hardness and strong wind resistance. The swing door adopts a DC servo waterproof motor, and the input is DC24V safe voltage. It is also resistant to cold, water immersion, and high temperature, and can be used normally in various harsh environments. A special balance seat is installed at the bottom of the door, which can improve the overall stability of the door and make it run more smoothly.

Ankuai T921 hanging door

4.Sliding doors: Sliding doors also have fences, mountain peaks, tree shapes, There are six door styles: louver, copper coin and checkered, and can be used with license plate recognition to automatically open the door when the car arrives., the effect of automatically closing the door when the car is moving. The door row is made of high-strength aluminum alloy, and the surface adopts electrostatic powder spraying and baking process. The treated surface has strong corrosion resistance; the vertical rods are equipped with vertical rod fixing sleeves on the upper and lower sides, which are more stable and firm. The door body movement mechanism adopts racing steel pulleys with small friction coefficient, high hardness, high rigidity and high wear resistance, ensuring that the door body slides smoothly and freely. The door body adopts a thickened bottom beam with a thickness of 5-12 mm, which is strong in wind resistance and stronger. The front and rear of the bottom beam adopts a biaxial cast aluminum wheel body design with embedded high-carbon chromium bearing steel balls, which has strong load-bearing capacity and smooth sliding. At the same time, the surface of the wheel body is covered with rubber to make the door sliding more stable. The bottom of the door adopts a special balance seat design, which greatly improves the stability of the door body, making the door body operate smoothly and has good wind resistance.

Ankuai T922 smart sliding door

The above is about the structural characteristics of industrial doors. Sliding doors, swing doors, hanging doors and sliding doors all have different characteristics. Industrial doors can be regarded as the largest access control equipment currently, and are especially suitable for large factories, logistics parks, warehousing institutions, and enterprises and institutions. Traditional industrial doors are mostly rolling shutter doors used in workshops, which rely on manual or electric methods to open and close. Today\’s industrial doors have been extended to entrance and exit access control systems, which can not only block cars and people, but can also be used with license plate recognition like barrier gates to achieve the effect of smart switches, which is a major breakthrough in modern industrial doors.