Installation case of electric retractable door floating door Tianfu New District No. 1 Primary School

Sometimes we encounter customers who install electric retractable doors and the installation time is different depending on the location. Today we received a special customer who needed to install an electric retractable door on Sunday. , maybe everyone is curious about what kind of customers need to install it on Sunday. Let’s reveal the reasons together.

Video loading…

Because right The place above is a school. The school has a lot of traffic from students and other people from Monday to Friday, and they come and go at any time. In this case, the installation will inevitably lead to a series of safety problems, so it is not suitable for installation. It can only be installed easily on Sundays when students are on holiday and the school has less traffic. This can ensure the safety of personnel.

Installation case of electric retractable door floating door Tianfu New District No. 1 Primary School

Electric floating door installation effect

According to the situation, we arranged for two masters to go to Chengdu Tianfu New District No. 1 Primary School on Sunday, October 24th to install the electric telescopic door series. Electric floating door. When installing this floating door, we still need to ensure that some requirements are met: first, check whether the ground is flat and whether there is a 220V power supply in the control room; second, if it is a dual motor (railless), it is mainly about the fixed position of the magnet, electric door (railed) ) is mainly the fixation and front-to-back positioning of the infrared magnet; the connection of the four-wire control box in the third control room. Once these are ready, the rest is relatively simple.

Installation case of electric retractable door floating door Tianfu New District No. 1 Primary School

The installation effect of the electric floating door

It took our master about 4 hours of installation time to install the floating door. After the master\’s final test, it was complete. Delivered to the other party. After explaining some safety matters and precautions to the other party, we have completed our Jieying electric retractable door

本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834

(0)
华夏门网的头像华夏门网
上一篇 2024年12月19日 10:03:00
下一篇 2024年12月19日 10:05:52

相关推荐

  • 深圳工业园悬浮门如何安装呢?

    深圳悬浮门管理控制系统具有多种功能,如门禁控制,实时监控,安全性和防盗报警。它主要有利于进入和退出的意愿访问和防止外人。它不仅促进了内部管理,又增强了内部安全。为用户提供了一个高效,经济的工作环境。 那么深圳工业园悬浮门如何安装呢?相信不少人是有疑问的,今天开门红科技就跟大家解答一下! 1、固定件预埋时需要保证3~4个以上的固定位保持在同一水平面上; 2、在…

    悬浮门 2023年9月20日
    250
  • 北京廠傢:詳解電動懸浮門與電動伸縮門的區別

      現在電動懸浮門與電動平移門的使用可以用隨處可見來形容瞭,即使我們天天都能看到,但是還是有很多人不能準確的區分開來,其實兩者是有所區別的,懸浮門是不接觸地面的,而電動伸縮門是以伸縮門的方式運行的,下面就由北京龍鼎瑞通電動門廠傢為大傢詳細講解電動懸浮門與電動伸縮門的區別供參考!   懸浮門特點:   首先在在制作工藝方面,電動懸浮門一般都是純鋁合金或碳鋼制造…

    悬浮门 2024年8月17日
    170
  • 如何辨别无轨悬浮门的材质?深圳厂家告诉你

    无轨悬浮门,到底是用什么材质用料做成的?我们在选购的时候,初步该如何辨别。 开门红科技归纳了以下4个无轨悬浮门材质用料的参考点: 1、 无轨悬浮门的门框一般是统一开料生产,门框的通透性好,且门框颜色色泽应一致。选购门框铝型材时,应避免表面有开口气泡(白点)和灰渣(黑点),以及裂纹、毛刺、起皮等明显缺陷的型材。 2、无轨悬浮门厚度一般是1.4-1.8MM左右,…

    悬浮门 2023年9月19日
    340
  • 无轨悬浮门的制作有哪些流程?

    无轨悬浮门的制作有哪些流程?相信不少人是有疑问的,今天深圳市开门红科技有限公司就跟大家解答一下! 一、确定用料 无轨悬浮门定制主要用材一般包括三个方面:铝型材、钢材、五金件。 好的悬浮门产品所选的铝型材,其厚度、强度和氧化膜一般都能够符合国家标准,比如说国家相关规定要求,悬浮门的铝型材壁厚在不低于1.2mm以上,氧化膜厚度应达到10微米。 而特种钢材要比普通…

    悬浮门 2023年9月19日
    370
  • 如何判断悬浮门质量及保养悬浮门?深圳龙华供应商教您

    如何保养悬浮门和判断悬浮门质量?悬浮门质量的好坏如何判断?今天开门红科技小编就给大家好好介绍下。 如何判断悬浮门质量的好坏? 1.站在距离门两米之外,观察这樘门的造型与做工,看它的门型是否工整,表面色泽是否纯正,纹理是否逼真;   2.站到半米之外,看门的接缝、边框等细小的部分做的是否细致,看它是否有拼接不严现象;   3.对着灯光,看其映视的灯影是否变形,…

    悬浮门 2023年10月5日
    130

联系我们

400-800-8888

在线咨询: QQ交谈

邮件:[email protected]

工作时间:周一至周五,9:30-18:30,节假日休息

关注微信