Fast door
How to install the photoelectric induction control system of the fast door? First, fix the photoelectric illuminator and reflector horizontally on both sides of the fast rolling shutter door frame, and install the photoelectric illuminator Connect the controller cable to the wiring terminal of the electric control box and connect according to the marked number (24 XO -X5 GND).
Krones Warm Tips: When the wiring terminal of the electric control box does not have a GND interface, you can connect the blue wire to the G point connection port. When the white wire of the photoelectric sensor is connected to the G point, the photoelectric sensor will have Signal, the door body rises when the object touches infrared rays: When the white line of the photoelectric sensor is connected to X5, there is no signal from the photoelectric sensor after the fast rolling door door body drops to the bottom, and there is no action when the object touches infrared rays.
1. Mirror reflection type door slider with effective distance 0-5M.
2. The effective distance of the transmission photoelectric sensor is O-10M from the door opening.
Connect the fast door sensor cable to the electric control box and turn on the power. The light emitter indicator light is on. The green light can be used normally. The yellow light indicates that the signal is misaligned. Manually adjust the light emitter and reflector up, down, left, and right. In the horizontal position, it can be used normally only when the return signal from the transmitter at the same level is green. Photoelectric sensor test: When the object passes the sensor, the photoelectric indicator light is yellow, and the door body rises but does not fall. When the object leaves the sensing area, the photoelectric indicator light is green, and the door body automatically lowers after a delay.
本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们：609448834
