How much do you know about the installation and acceptance of wooden doors?

Let’s talk about the installation and acceptance methods of wooden doors.

·1. When the wooden door is dropped, whether it is purchased from the decoration unit or the material supplier, one is to determine the door opening and the other is to determine the set of lines. The size, the width of the set line depends on how wide it is.

·2. When installing, the installation method must be foam glue. The main thing is how to close the horizontal and vertical openings for unloading the cables? One method is 45 degrees. The footbath is also at Haitangjiao. Some places are called Ping\’an. One method is to make the vertical set of lines a little higher than the horizontal set of lines, about one centimeter higher, to stand out.

But there is a requirement for 45-degree wine to get ahead. 45-degree wine must be cut well. If 45-degree wine cannot be cut well, it will not be sewn. Evenly, the seams are big and small, and it will be ugly when the time comes. So pay attention to the spray feet when accepting it.

·3. What should we pay attention to during acceptance? The gaps between the door leaf and the panel are generally uniform. They cannot be wider or narrower. There is an obvious difference. There are two vertical seams in one circle, and one vertical seam must be horizontal.

·4. Check whether the door handle is locked or not. It is more natural. There are also anti-locks. When they are anti-locked, they can be anti-locked. There are also door handles that can be opened to open the door leaf. Can the door be sucked with the door suction?

·5. When closing the door, check whether the gaps between the door leaf and the cover are even and uneven, and whether the anti-collision strips are even and uneven. They must be evenly sealed. If the gaps are of different widths, you need to adjust the door lock first. Is it a problem with the door lock? If the door lock is still uneven after adjusting it, the door leaf will be deformed. If the door leaf is deformed, it can only be said that it is difficult to adjust. If it cannot be adjusted, just press it, because the wood product has moisture content, and it is easy to deform at noon. Can\’t seem to attract it.