Many people don’t know much about finished ceramic tile cabinets. Today, I bring you a set of installation videos of all-ceramic cabinets in Nanyang, Henan, so that you can understand its production process more intuitively. When it comes to using ceramic tiles to make cabinets, many people are discussing whether to add cement and steel bars. In fact, many people don\’t know enough about tile cabinets and are always worried about whether they will break easily. So, does a floor need to be built under the cabinets? The answer is that there is no need to build a floor, you only need to use special porcelain cabinet corners for assembly. The installation method of making tile cabinets is similar to that of traditional cabinets, and does not require too many special skills. The main purpose of making tile cabinets is to prevent moisture and facilitate maintenance, so as to avoid problems such as mold and deformation of the cabinets. This set of diamond cabinets uses 6 ceramic tiles. The cost is relatively low. It is not difficult to make it yourself. You only need to buy some necessary accessories. It takes about 30 tiles to make a set of tile cabinets and takes about two days to make. When making the base plate, it can be bonded with structural glue or filled with cement and sand. Each plate needs to be pre-installed with stainless steel and fully loaded with nuts, so as to avoid the problem of rust and falling off later. If the ground is uneven, it can be solved by adjusting the height of the board. The corner cabinet uses an integrated stove, so the side panels on both sides are floor-to-ceiling. The front beam adopts a handle-free profile, which is not only beautiful but also avoids collisions. A layer of backing board needs to be laid on the cabinet to prevent the countertop from deforming or breaking.
本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们：609448834
