How to choose factory industrial doors?

How to choose industrial doors for factories?

When building factories, how to choose industrial doors for workshops?

Generally, the relative environmental area of ​​the workshop is relatively large. Due to the needs of some special mechanical equipment, there are also certain requirements for the wind pressure on site. Therefore, the choice of industrial doors in the workshop is Very important!

For example: the choice of outdoor doors is related to the insect and rodent prevention work of the entire workshop; the inner door in the workshop is related to whether it is convenient and fast during production and use. So, how to choose industrial doors for factory buildings?

1. Industrial lifting door Industrial lifting door is a widely used and basic door facility in modern factories. It is used for personnel , large equipment, necessary passages for incoming and outgoing goods. It can basically meet different building door openings. When opened, Qishli industrial doors run along the tracks on both sides of the wall. They do not occupy the space on both sides of the door opening and are not subject to space restrictions. There are three ways of vertical lifting, standard lifting, and high-level lifting, which are more convenient. Low installation conditions and high practicality have been widely used. Door panel: Made of double-sided galvanized sheet, with a thickness of 40-50mm. There are two opening methods: manual industrial lifting door and electric industrial lifting door. According to the control method, it can be divided into: remote control, button, radar induction, geomagnetic induction, infrared induction, etc. Suitable for: isolation of factories and areas with high cleanliness requirements such as medicine, food, electronics, printing, supermarkets, etc.

2. How to choose industrial doors in workshops? PVC fast rolling doors are generally suitable for logistics channels that require frequent high-speed opening and closing, indoor and outdoor logistics, fast lanes in workshops, buffer workshops, etc. that require workshop cleanliness. PVC fast rolling shutter doors have the functions of heat preservation, cold preservation, insect protection, windproof, dustproof, sound insulation and odor prevention. It opens and closes at high speed, and can use different colors and diversified colors. It can also directly and effectively block the air circulation inside and outside the workshop door, blocking dust and causing indoor cross-contamination. Door curtain: Made of PVC flame-retardant cloth, which is a high-strength polyester. Fiber, the surface is sprayed with epoxy resin to make a soft curtain door body. Operating parameters: opening speed 0.6-2.0m/s, service life >50,0000 times.

Control method: radar induction control, geomagnetic ring control, pull rope control, interactive chain, etc. Suitable for: automobile manufacturing, medicine, food, chemistry, textile, electronics, supermarkets, shops, workshops, printing , clean factory, etc. 3. If the factory warehouse door is an external warehouse, workshop logistics door, warehouse door, etc., it is recommended to use a hard fast rolling door, which requires frequent high-speed traffic, which can effectively improve efficiency.

The rigid fast-rolling door is a new type of metal industrial door that integrates thermal insulation, energy saving, sealing, high efficiency, wind resistance and environmental protection. Door panel: double-layer stretched aluminum plate is formed in one go. The door panel is 43mm thick and filled with polyurethane. Foaming. Structure: Broken bridge insulation structure, wind resistance level up to 12, surface passed Oxidation treatment, using silencer load-bearing hinges. Motor: servo motor. Protection system: infrared safety eye, bottom airbag, power outage emergency opening device. Each industrial door has its own uniqueness and advantages. Which industrial door is used mainly depends on the construction. Comprehensive consideration of the structure and usage scenarios as well as the user’s own needs