Molded door VS blister door

People often confuse molded doors and blister doors, but there is a difference between the two. Today I will explain to you the molded doors and blister doors. difference.

What is a molded door

Molded door is a wooden interior door with concave and convex shapes or with or without wood grain made of molded door panels. The molded door panels are made of wood fiber and are molded in one step through high temperature and high pressure. When this panel was launched It has led a revolution in the international indoor door industry. While it brings stable quality, it also expresses a strong concept of environmental protection and protects forest resources.

Molded wooden doors are favored by middle-income families because they are more economical and convenient than solid wood doors. Because the door panel is hollow inside, the natural sound insulation effect is worse than that of solid wooden doors, and it cannot be wet or bumped. Molded wooden doors are made of wood. Veneer and brush\”Clean\” The \”lacquered\” veneer surface maintains the decorative effect of the natural texture of wood. It can also be used for panel parquet, which is beautiful, lively, economical and practical. The molded door is also moisture-proof, has a small expansion coefficient and is resistant to deformation. After being used for a period of time, it will not There will be surface cracking and oxidative discoloration.

What is a blister door

Blister molded door is a name that combines material and technology.\”Suction\” refers to the process of vacuum suction, \”plastic\” refers to the PVC film on the surface, and \”mold\” refers to The door panel after tool milling but before pressing the PVC film. \”Pressing\” refers to the pressing process when the PVC film is formed, which is referred to as the blister molded door.

The thickness of PVC on the surface of the blister door panels ranges from 0.17 mm to 0.35 mm. The PVC film is produced in Germany and Japan. The high-gloss series produced by Nissan is 1.0 thick.

The difference between molded doors and blister doors

1. Different concepts

Molded door panels are made of medium density board (MDF) or high density board (HDF) or steel plate as the base material, and the surface is decorated with natural solid wood skins such as ash, black walnut, rosewood and other solid wood skins. Or laminated with melamine paper, or without veneer and skin, after high-tonnage vacuum The molding machine uses \”one-time molding\” or \”two-time molding\” to produce door panels under high-temperature, high-pressure and high-heat environments. The PVC film used for blister door panels generally has a thickness of 0.15mm-0.45mm. The price is more expensive in Germany, followed by Products from South Korea, Japan and joint ventures are second, with domestic prices being lower.

2. Different advantages and disadvantages

If the blister door panel is made of high-quality density board, it will not be easily deformed, has a beautiful appearance, is scratch-resistant and flame-retardant. If the blister door panel is made of poor-quality base material, the base material will be easily deformed, rough in appearance, and afraid of scratches. etc. The advantages of molded door panels are rich colors, vivid wood grains, pure colors, no cracking, and no deformation. The disadvantages of molded door panels are that they cannot be in contact with or close to high-temperature objects for a long time. At the same time, the design body cannot be too long or too large.It is easy to deform.

PartText comes from the Internet. If there is any infringement, please contact us to delete it!