What is the difference between log doors, solid doors, renovated doors and wpc wood plastic doors? Jiang Su Meile Jiamumen

Along with the rise in national economic levels With the increase in consumption levels of people, the doors commonly used in daily living decoration are generally divided into two categories: log doors, solid wood doors, renovated doors and wood-plastic doors. When the wooden door store guides to tell you that there are so many varieties of wooden doors, are you already big? Today, the editor will explain their differences for the big guys, so that you can choose the most suitable wooden door. The best one is!

(I) Log door

Login door refers to wooden doors processed and made from selected natural imported wood as raw materials. Its main feature is that the materials of all parts of the door fan are It is the same tree and is consistent inside and outside. Generally, all imported materials are used, without deformation, cracking, finger-free connection, and no skin.

The combination structure of log doors is traditionally a circular tenon, which is generally used less frequently. The reason is that waste raw materials, difficult to control operation, and high costs. The advantages are firmly bonded through the permeable tenon and tenon, which conforms to the principle of force cancellation and is not easy to deform. Nowadays, some factories use round rod tenons or semi-cut and half tenon combinations to save raw materials and be easy to process. It is not as good as the permeable mortise structure invented by Ruban, the founder of carpenters. The log doors of ancient buildings are examples.

(II) Real wood door

Not all real wood doors are expensive, they should be divided into two types: \”finger joint board\” and \”log\”. The price of the \”finger joint board\” and the replenished real wood paint door with solid veneer The difference is not big. The log door is easy to understand and identify. There are no traces of splicing out small wooden boards, but the price is relatively high.

(II) Repair door

The replenishment door consists of two parts: \”Substrate layer\” and \”Flat layer\”. The inner substrate is a fir board or multi-layer sling, and a density board is attached to the outer surface. Since the substrate is a multi-layer sling made of fir or fir, when introducing the business, it will be very easy to hear, \”This is a real wood door\” . The refill door is also divided into many categories. The classification is the material types and craftsmanship of the \”surface layer\” pasted outside the substrate layer. It is mainly divided into: ordinary plastic soft leather, melamine film, polymer plate, Steel plate, paper lacquer, solid wood veneer for paint and open paint.

①Packing ordinary plastic soft leather: the lowest cost, the market price is about 500 yuan/fan (the average market price, packaging, no hardware, the same below) . Defects: Since the plastic soft leather can be stretched and pasted on the density plate on the wool surface, the bulge of the particle can be seen from the surface, and the number of particles is low. This method of making the door, and the \”cube\” of the cabinet board Blister doors are consistent.

②Stand polymer plate: called \”polymer door\”, the simulation effect of wood texture is not strong, and it is a medium and low file.

③Standard steel plate: called \”steel wooden door\”, market price and The polymer door is basically the same.

④ The melamine film is pasted: This door is called \”strengthening door\”. It is similar to the materials used in the overall clothes cabinet. It will not cause skin removal if you soak in water. The market price is about 900 yuan/fan, which belongs to the middle file room door. Purchase At the time, be careful to check whether the side cover of the door panel is thick and smooth (the same is true for the production quality of the entire cabinet board). If the seal is thin and has a tumbling, it is produced by a small factory.

Prepapered with painted paper and painted wood veneer and painted on open paint are all called \”Replenishing the solid wood paint door\”.

The several types of refill doors mentioned above are not painted, and the cost is definitely lower than that of paint doors. Painted refill doors should be divided into two types: \”paper leather\” and \”paper veneer\”. From the outside, it is difficult to compare without putting it together. You need to cut and tear off a small piece to check to find the difference. . In terms of factory cost, paint doors with paper peels are nearly half cheaper than those with wooden veneer. The real paint doors with wooden veneer are mainly used to make repainted paint doors with open paint effects. Most of the paint is ash-shaped willow veneer, which is relatively common. The strong wood texture has a concave and convex feeling, and the paste cannot achieve this effect.

(III) Wood-plastic door/p>

In recent years, wood plastic doors have also achieved some market share with their special waterproof properties. The production cost is about the same as the \”paper-papered paint door\”. The base material is made of wood powder and resin. . The following is an introduction to the material properties of wood plastic doors.

1. The product has the same processing properties as logs, can be tiled, can be cut, can be bonded , fixed with keels or bolts, with smooth and fine surface,It requires sanding and paint, which has good paint adhesion and can also be painted according to personal preference.

2. The product has better physical properties than logs, and is more stable than wood size, and will not cause cracks, tumbling, no wood scars or oblique patterns. Adding colorants, coating or refining surfaces can make colored Various products are therefore not required for regular maintenance.

3. Can meet a variety of requirements such as specifications, sizes, shapes, thicknesses, etc., which also includes providing a variety of finished products with designs, colors and wood textures to give customers more choices.

4. The product has excellent properties such as fireproof, waterproof, corrosion resistance, moisture resistance, no mortar, no longer fungi, acid resistance, no poison, no pollution, etc., and has low maintenance costs.

5. The product uses wood-like appearance, which is harder and has a long life than ordinary plastic, and can be heat-molded, with high strength and energy saving.

6. The product has a light quantity, a warm and smooth surface, and does not contain formaldehyde and other harmful substances, and is non-toxic or contaminated.

Strongly recommend Jiang Su MeilejiaWooden plastic door, Jiangsu Meilejia Technology New Materials Co., Ltd. is located in No. 6, Scientific Research 2nd Road, Kaikai District, Zhengzhou City, Jiangsuzhou City. The company covers an area of ​​about 100 yuan. It is a wooden house product and new technology materials. It is designed. , research and development, production, sales and application in a whole technology-based modern enterprise. Meilejia has a design team with 20 years of experience, a management team with listed companies\’ management experience, and a group of tireless and perfect production teams. Since its establishment, the company has always regarded \”people-oriented, honest and kind, technological innovation, and leading the industry.\” The enterprise mission is to win the trust of users with sincere and thoughtful service. Welcome to visit Jiangsu Meilejia.

The above are the log doors and solid wood doors brought by the editor , What is the difference between a renovated door and a wood-plastic door? For related content and wood plastic related issues, please contact us