Talking about these seven \”pits\” in decorating a house, how many have you stepped on

Decoration of a house is a very professional thing and has a lot to do with experience. Today I will talk about what I have seen in recent years Some pitfalls for your reference. #Universal Life Guide#

1. Remove the sliding door

Many people like to remove the sliding doors of the living room and the balcony, and then seal the balcony. The living room feels more atmospheric. In fact, doing this is both costing materials and \”rice\”.

I met many clean water houses. The sliding door delivered by the developer is of great quality. It was recommended to dismantle it in the early stage of decoration. It can only be treated as scrap. The result in the later stage is :

*Not insulated, cold in winter and hot in summer. Especially the long living room, with a span of almost 7-8 meters, many of which can design glass-to-ceiling windows. The heating and air conditioning of users will be more energy-intensive in the later period, and only window merchants will have the last laugh.

*The privacy of the living room has decreased. The distance between buildings is not too far now. When you stand in your own house, you can see the neighbor\’s house opposite, especially at night, which is very obvious and has very poor privacy.

2. Tie the bay window

Now many rooms have bay window designs, with a height of about 50 cm, and some people In order to make the room more spacious, I knocked off the bay window and replaced the floor-to-ceiling glass again. In fact, this operation is also a way to add to the slightest amount of money and fermi.

I met a user\’s house and did not open the bay window, but cleverly changed it to a storage drawer, which saved decoration costs and increased storage space.

3. On-site cabinet making

Some users heard that customized cabinets are very expensive, and they are worried that the manufacturer will lose the bag materials and replace them with inferior ones without environmental protection. , the cabinet you make yourself is safe and reliable, so you buy wood to get your home and ask the carpenter to make the cabinet on site.

The result was not only the scene was dusty, but it was still 100% ugly. The main reason was that the edges and mouths and some surface details were not handled well, and it was very ugly in the end.

4. Make a floor-standing bedside table

It is normal to configure sweeping robots at home, but There are always blind spots under desks and bedside tables. Even if you use a mop to clean them manually, it will be very troublesome to encounter these places.

So, the bedside table and desk in the bedroom can be designed without custom-made floor-standing, but rather suspended, which can save space and facilitate sanitary cleaning.

5. Do a hot water cycle

Hot water cycle is to solve the problem of using hot water for a long time. A device, usually used in a leap, villa or large flat floor. Because it involves the transformation and addition of water pipesThe most basic method of upgrading equipment is:

To string all the water points in the house, minimize the length of the branch pipe, and then add a hot water pipe to the water heater. The water heater must Use a hot water storage tank and then add a circulation control device. In order to allow users to have the effect of instant heat, the hot water circulation function must be turned on, and the water heater must be heated at any time to maintain the set hot water temperature.

I think that if the user has only 2 bathrooms in the house, there are only 1-2 people in the family, and even the frequency of using hot water is very low. This hot water circulation function is a continuous Continuous waste, early installation costs are also wasteful.

So, the hot water circulation function is not suitable for flat floors or small populations. For such apartments, I usually recommend them. Hot water treasure or electric water faucet is both economical and practical and saves time.

6. Do a masterless lamp design

No doubt, the design of the mainless light is the latest trendy decorative design, just like the reflector trough-style ceiling a few years ago; I think the decoration of the mainless light design is not suitable. Generally, flat floor apartments with floor height will reduce the floor height by 8-10 cm.

Now, install floor heating and hidden in your home Air conditioners (such as duct machines, multi-connection) are already the norm. Floor heating should be increased by 5 or 6 cm, and air outlets of air conditioners should avoid ceilings without main lamps, so the floor height is less than 2.5 meters, which feels very depressing.

I think that ordinary flat floor apartments with floor height should try their best to maintain the floor height while ensuring the quality of life.

7. Blindly use central air conditioners

The previous article mentions hidden air conditioners. The central air conditioners we often call belong to. If the apartment is not large and the population is Not much, there is room for installation of external units, I think central air conditioning is not the best solution.

I think that if the layout of three-bedroom or four-bedroom or even two-story floors is 1-3 people in the later stage, I don’t think it is necessary to install central air conditioners, just install household air duct machine air conditioners or Mixed installation of wall-mounted air conditioners and air duct machine air conditioners saves installation costs, low latency costs and simple maintenance.

Summary

Decorate the house, is a Complex processes are also a job that coexists with professionalism and experience. I think the longest design is based on a practical perspective. Just like looking back at the reflector trough ceiling with gypsum lines, it is simply ugly.