Anhui Feile has obtained a translation automatic door patent with a backup power supply, ensuring that the shielded door is open and used normally

Finance News on January 21, 2025, the information of the National Knowledge and Rights Bureau shows that Anhui Feile Automation Door Manufacturing Co., Ltd. has obtained a specialty titled \”Panking Automatic Door with Reservation Power Supply\” , Authorization Announcement No. CN 222310592 U, application date is May 2024.

A summary of the patent shows that the utility model provides a translational automatic door with a power supply for use, including a shielding wall, a door hole is installed on the shielding wall, and a slide chute is installed on the shielding wall and below the door hole is installed. Two mounting blocks are slidingly installed on the wall and located in the slide chute. The tops of the two mounting blocks are fixedly installed with doors. When the two doors are close to each other, the two doors can be connected to each other. The hole is sealed. This practical new model uses the charging module and the power storage module to electrically connect the power storage module to the drive assembly. When an unexpected situation causes the shield door to be powered off, the power storage module can be used to supply power to the drive assembly to ensure the normal opening of the shield door. Co-use mode When the output end of the block is connected to the electric storage module and the drive assembly, the charging module can supply power to the drive assembly, and at the same time charge the electric storage module, thereby ensuring that the electric storage module is in the electric storage state and does not require staff to position it as the battery charging, for easy use.

Tianyan Check data shows that Anhui Feile Automatic Door Manufacturing Co., Ltd., established in 2016 and is located in Chuzhou City. It is an enterprise mainly engaged in general equipment manufacturing. The enterprise registered capital is RMB 50 million. Through Tianyan Check data analysis, Anhui Feile Automation Door Manufacturing Co., Ltd. participated in bidding projects 6 times, had 1 trademark information in terms of intellectual property rights and 65 patent information. In addition, the company also has 17 administrative licenses.

This article comes from the financial world

本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834

Like (0)
华夏门网的头像华夏门网
Previous 2025年2月21日
Next 2025年2月21日

相关推荐

  • Detailed introduction of Yunchang electric sliding door

    The electric sliding door operates in the entire section, with an overall beautiful appearance and strong wind resistance. It is generally used for unit gates, factory gates, and s…

    平移门 2025年1月7日
    130
  • 小区安装人脸识别+IC刷卡广告平移门

    林州运通玉荷里别墅区智能化设计施工,人行通道宽3.08米,平移门常规款尺寸(2.6米 2.8米 3米 3.2米),选用3米安装 首先固定两侧立柱,安装立柱有方向,立柱有缺口的一面朝向小区,也就是有电机一面向小区,用水平仪安装垂直 自带160mm*200mm的膨胀螺丝,用20的电锤头 两侧立柱高度一定要一样 然后安装横梁,拧紧两侧螺丝共四颗螺丝。 再安装固定门…

    平移门 2023年9月29日
    70
  • 平移门露天电机和门扇之间的限位计算方法

    平移门露天电机和门扇之间的限位计算方法 我在昆明海顿车库门的新媒体平台分享了平移门的电机安装在地面,电机和门板之间有一个可以调节限位的空间,那这个距离是怎么计算的呢?据介绍,平移门露天电机和门扇之间的限位距离大约是40mm。 露天电机的限位器主要有左右限位和上下限位以及缓冲垫组成。左右限位分别是控制电机推动或者拉动平移门的门扇进行平移工作的极限位置,这个可以…

    平移门 2023年9月19日
    1590
  • 崇州段滑门安装案例

    大家好,我们这里是捷鹰科技!前天崇州蜀九香安装14.8米订购的段滑门,今天师傅就去安装。段滑门同折叠门安装过程一样的复杂,前两天挖槽预埋线,今天要进行安装,客户他订购的这款是灰色的镂空柱, 伸缩门 这里面还带有防盘防撞报警系统,是通过遥控器和蓝牙开关来操作超级的方便,然后这个门因为是镂空设计,所以外面看到里面的情况也可以从里面看到外面的情况,这个门虽然才叫厚…

    平移门 2023年10月19日
    180

联系我们

400-800-8888

在线咨询: QQ交谈

邮件:[email protected]

工作时间:周一至周五,9:30-18:30,节假日休息

关注微信