Which type of underground car door is 2.1 meters high? Which kind of car door is suitable for installation?

What kind of warehouse is suitable for installation with a hole height of 2.1 meters?

Whatever we have analyzed again and again In the case of installation of roll doors or flip doors, but someone still asks what kind of parking doors are suitable for the double-car doors in the villa when decorating the underground car warehouse. Recently, when the Kunming Haiton Car Park was installing an underground car park for a business owner, he encountered a classic case again.

This is a double parking space in an underground car. The distance between the lowest point of the fire pipe above the door hole is 2.1 meters. These pipes pass through the above the door hole, so It is impossible to install a roll door whether it is an outer or an inner part because the wrapper, motor, and pads of the roll door cannot be penetrated by obstacles. The only option is and only a mid-mounted flip car door, and the movable door panel has a 10 cm left.

The option of \”has and only has\” is to say that this kind of underground car is low in the hole, because it is After the fire pipes, downspread pipes, second beams and other obstacles are covered, if a car warehouse door is needed, you can consider opening the door in order to ensure that private cars, off-road cars, etc. can get off to the underground car warehouse and drive into the private car seat normally. A warehouse with a height of more than 2 meters. If you want to make the opening height of 2 meters, whether it is a roll door, a pan door, or a folding door, you can make a fortune within 2 meters or 2.1 meters. At this time, the flip car door will open along the ceiling after the opening door. Opening the door is the best choice because this is the only car door that does not occupy the height of the door.

If it is to install the coil door, the motor, sheet, drum, and enclosure need to occupy at least about 40 cm of space, 2.1-0.4=1.7 (meters) , What is the concept of the underground car door opening height of only 1.7 meters? Don’t say that normal off-road cars cannot get in. Even ordinary models may have to subconsciously enter the house with low heads when returning. I believe that the owner will not consider the car door that is easy to enter, and it is difficult for people and cars to enter.

The barriers at the entrance of the door determine the type of the warehouse, and the installation technology determines the height of the door. Taking this door-hole barrier with a distance of only 2.1 meters from the lowest point to the ground, as an example, if you want to install a clay that allows the Benzhne G (the height of the car is 1.98 meters) to enter and exit the underground car door smoothly, the door height is at least 2 meters. The door space left for the installer is 10 cm. According to the case of a flip-top car door we have talked about before, the minimum half-voltage of the turn is 15 cm. For this door hole, the fixed door lintel is more than 15 cm, and the opening height is 2.1-0.15=1.95, which cannot meet the Bien Da G. Incoming needs.

To the installer of the Hayton Car Door in Kunming, there are strange holes (not regular four-sided shapes), double torsion spring jumps, double lane turnover, small one-third Various unique installation secrets such as cutting method, steel wire rope pre-treading method, 24 pipe beam barriers crossing fixed doors, etc., have successfully challenged and installed one high-difficulty flip-board car door after another. This time it was 10 cm In the space, you need to challenge and cross two pipes, and use a dual-channel running method to turn 4 535mm doors under the ceiling.

All The decoration problems end up being mathematical questions. In this application question, the known conditions are as follows: the minimum distance between the door and the ground is 2.1 meters, and the door height is required to be more than 2 meters. After the actual installation is completed, the door height is 2.01 meters, and the fixed The height of the door is 10 cm, and it is actually 9 cm. The distance between the first wheel on the double wheel and the small wheel is generally between 1-2 cm. Find out what is the distance between the door panel turning to the lowest point of the barrier? You need to calculate the wheel. The minimum angle required to run at a right angle turn can be completed and the installation task will be challenged together.