The window selection in courtyard decoration may seem simple, but the window material problems are challenging. In the market, the materials of doors and windows are mainly concentrated in plastic doors, aluminum alloy doors, wooden doors and solid wood renovated doors.

The main component of plastic door windows is polyvinyl chloride, which is affected by corrosion resistance and good sound insulation and temperature preservation, but its service life is about 20 years; while aluminum alloy door windows are mainly The strength, imperfection and corrosion resistance of the ingredients are well guaranteed. After heat treatment, their strength can reach 70~150 MPa, and their service life can reach 50 years.

But there are many types of door and window materials, The most common materials on the market are aluminum alloy and plastic steel. The solidity of aluminum alloy doors and windows is more powerful, and the plastic steel is more warm. These two have their own advantages. Look at the following article to give you a deeper look. Understand!

Chapter 1: Comparison between aluminum alloy and plastic steel. Before choosing, you must first understand the common points of these two

Common point 1: aluminum alloy and plastic steel The doors and windows have good sound insulation effects

The sound insulation effects of aluminum alloy doors and plastic doors have good performance in sound insulation performance. The sound insulation effects of aluminum alloy doors and windows mainly rely on their solid materials and Special sealing structure, and plastic windows have a certain sound insulation effect due to their special plastic materials themselves, and their structural design and sealing performance are also excellent, so they can meet daily needs in sound insulation effect.

If you have high requirements for sound insulation, aluminum alloy and plastic windows are good choices.

Common Point 2 :Alloy alloy and plastic doors have good temperature-keeping effects

In daily life of the courtyard, the temperature maintenance performance of the door is also very important.

All alloy doors and windows have relatively good heat conductivity due to their good heat conductivity, so they are relatively weak in temperature-keeping performance. But by adopting temperature-keeping designs such as double-layer or triple-layer glass, they can effectively improve the aluminium. The temperature-keeping effect of alloy doors.

Due to its special plastic material, plastic doors and windows are more powerful than aluminum alloy doors and windows. In addition, their sealing performance is better, so Further improve its temperature-keeping effect.

Chapter 2: Alternative alloys and plastic steel have their own advantages. Let’s see how to choose so as not to step on the mine?

Odd-to-life comparison: In terms of life, the life of aluminum alloy doors can reach more than 50 years, and the life of plastic doors is about 20 years. Since different usage environments and maintenance methods may affect the use of windows, the use of life is for reference only.

Under normal circumstances, the use of aluminum alloy doors is longer than that of plastic doors, but if you say that your budget is indeed limited, you can also choose plastic doors. After all, 20 years of use is not short-term. Daily use is basically no problem.

It can be seen from the above data , Alloy alloy materials have higher strength and are suitable for use in more stringent environments, such as special environments such as the sea; and plastic doors are more suitable for ordinary urban residential use.

All the considerations are: if you note the strength and durability of the main window, you are more inclined to use aluminum alloy doors; if you note the thermal insulation and price ratio, you are more inclined to choose plastic doors.

Odd comparison 2: Sealing

Sealing is one of the important features of aluminum alloys and plastic windows. The sealing properties of aluminum alloy doors and windows mainly rely on the tight and special sealing structure of aluminum alloy materials themselves, such as silicone seals or EPM seals, which can effectively prevent the ingress of air, dust and moisture.

The sealing properties of plastic windows mainly rely on the sealing properties of the plastic material itself, coupled with its structural design and the design of sealing parts, such as ethylene propylene rubber sealing, can also effectively prevent air, dust and moisture. Enter.

If you have higher requirements for sealing in the warehouse, you can consider the way aluminum alloy and plastic windows are combined.

Oddity comparison three: sex price ratio

The price of aluminum alloy doors and windows is more expensive, and the production workmanship is more complicated, so the cost is higher and the performance is relatively low. The production workmanship of plastic windows is relatively simple, and the material cost is relatively low, so its price is more affordable. A higher sex ratio is suitable for a household with limited budget.

If you have limited decoration budgets, then a household with a budget of 50,000-60,000 can consider plastic windows first, which has a higher sex ratio. .

Chapter 3: Aluminum alloy and plastic door windows, how to choose to buy a suitable door window?

First Step: Choose based on budget

When choosing aluminum alloy or plastic door window, you need to determine it based on your own budget. If the budget is sufficient, you can choose aluminum alloy door window and invest more at one time. OK, the later use life is long, the maintenance cost is low, and the price is higher.

If the budget is limited, You can choose plastic doors, which will be more popular, but you should pay attention to choosing when purchasing. Protected manufacturers and brands to ensure product quality and after-sales service.

Step 2: Select based on the use environment

The choice of aluminum alloy and plastic door windows also requires consideration of the use environment. If you live in a seaside or in a highly polluted area, aluminum alloy doors are more corrosion-resistant and more suitable for long-term use.

If it is an ordinary urban residence, you can choose according to your personal needs and budget.

Step 3: Select according to the performance of doors

When choosing aluminum alloy or plastic doors, you should also consider doors Performance requirements, such as sound insulation, temperature maintenance, etc. Generally speaking, the temperature maintenance performance of aluminum alloy and plastic doors is not bad, but the sound insulation performance will be slightly different.All alloy doors and windows can better meet high sound insulation due to their material characteristics. need.

When choosing doors and windows, you should not only consider the types of materials, but also the local climate conditions. The climate conditions in different regions are different, so the selection of doors and windows should also be different. If you live in a damp area, you can choose door and window materials with strong moisture resistance, such as aluminum alloy or plastics. If you live in a dry area, you can choose door and window materials with good air permeability to Ensure indoor air circulation.

In the future, the doors and windows of environmentally friendly materials may become a new trend in the market and are worth noting. At the same time, the installation art of doors and windows is also very important. Installing properly will also affect the use effect of doors and windows, so it is very necessary to choose a professional installation team.

With the continuous advancement of technology, more types of window materials may appear in the future, such as fiber reinforced composite materials, which are worth noting. At the same time, the rise of smart homes has also made people more and more concerned about smart doors and windows. In the future, more types of doors and window materials and products may appear in the market, and consumers can choose according to their needs.

In general, when choosing aluminum alloy or plastic door windows, you need to consider factors such as budget, usage environment and performance requirements in order to find a door and window product that suits you.