How to choose explosion-proof paint for car body armor?

The car body armor explosion-proof paint has been loved by car adapters in the past two years, with personalized appearance and strong performance. Especially car owners who play off-road, they like to spray their war car with a layer of armor and explosion-proof paint.

But, would you choose armor paint? Do you know how to choose a more suitable armor paint?

At present, the armor paints in the domestic market can be roughly divided into three types:

1. Quick-condensing armor explosion-proof paint; ( Polyurea)

Products on sale in China: LINE-X, ape gold pendant, gold pendant armor, four-power armor

Use special equipment. Imported equipment generally uses Graco\’s polyurea sprayer. One machine has about 200,000 yuan. Domestic equipment ranges from 20,000 to 100,000 yuan. There are air-pressure-increasing sprayers and hydraulic sprayers, and there are also non-standard machines. These are some air sprayers. There is also a handheld lightweight device, which has the same principle as a stylus spray. The two sets are 1:1 at the same time, and then sprayed with gas fog after mixing through the mixing tube.

Advantages: The fast-gel armor paint has a fast construction speed and uniform particle size. Low material cost.

Disadvantages: Temperature adjustment and high cost of cleaning and maintenance of equipment.

2. Closing armor explosion-proof paint; (modified polyurea)

Domestic products: paint door shield armor , solids, etc.

Calcification armor paint is modified to the basis of the fast-cooling armor paint. It can be operated with ordinary 3.0-6.0 guns and connected to the gas pump It can be operated, the equipment maintenance is simple, and the operation is simple. Because the clamped armor paint has a long operating time, the error rate is relatively high, and it can be more careful in operation. Many edges and corners can be sprayed. You can also adjust the paint output and air output to control the size of the particles according to the needs. height.

Advantages: The equipment requirements are low, and construction operations can be carried out almost all over the country. The color can be used with 1K car paint, which is more convenient to adjust the color, the particle size can be adjusted, and the construction difficulty is low. It has good resistance to change and trace resistance.

Disadvantages: Waiting time after construction is long and tastes good.

3. Other types of armor paint

Domestic products:

Is this type of paint not sure which one is One type of material is acrylic, modified blue, and emulsified rubber paint. This type of paint is also sold according to armor paint. Because armor paint does not limit what the material is, it cannot be said that these are fake armor paints because armor. Paint is a singular name. Some of this type of paint are improved by the base plate armor paint, and there are also acrylic texture paints.

Advantages: The price is cheap and has a certain protective effect.

Disadvantages: Poor yellow resistance, color change, poor stain resistance, and occasionally falling and cracking.

How to choose depends on the owner\’s own needs and the construction convenience. Good performance car armor paint will basically not spray the entire off-road car It is less than 10,000 yuan, of course, if the construction fee is cheap, it may be 7,000 or 8,000 yuan. But if you spray the entire car for 3-5,000 yuan a year, it is a bit unrealistic. Either the materials are used very little, or the materials are very cheap.