The neighborhood entrance door is plus a door closure. At first glance, it looks luxurious and elegant. After looking at it for a long time, I found out that the decoration is reversed.

Last week when I returned to my husband from Hefei and went to the neighborhood with my mother, I found that the neighborhood had brought him into the door and installed a complete set of wooden doors. The house was 300 square meters wide, so I added this complete set of doors. Yes, luxurious, elegant and beautiful, I smelled the breath of a rich man. I also have to study it, otherwise the light-watering fog protection door will be too shabby and will be more domineering.

But when I looked carefully, I found that the door of the anti-block door was reversed, it was Is it hard to be stolen if I installed it in the store instead of outside the door?

1: Process the board and make the door head and two-sided wooden boards.

According to neighboring preferences, determine the style of ancient Chinese doors;

Cut the wooden boards well and form the effect of adding the doors, so multiple wooden boards and guns are needed. .

2: Measuring the painting line, installing the supporting plate. Use right-angle tools to perform the painting line along the corner;

Use guns to install the lateral support plate.

Pull screw the hole along the painting line;

When screwing , small wooden blocks need to be added in the middle as support board;

Last on the top of the small wooden block Add a piece of wood to serve as a fixed \”bridge beam\”.

3: Will be made The door head is installed on the door:

Use the connected \”bridge beam\” installed on the wall, and connect the gun, screw and door to fix it.

Implication: There are 3 fixed \”bridge beams\” connected to each other. You can fix the two sides first and then fix the middle.

4: Install the two-sided door decoration. First use the electric wall to drill holes and install the screws.

Then fix the wooden decorative panel on the hole, and note that the two sides need to be paired and keep horizontal and vertical to the door. /p>

PS: Remove the original directional support plate.

5: Installation Two-sided wooden boards. Just use a gun to fix it, but you still have to pay attention to being horizontally and perpendicular to the door.

After finally rubbing the slut, the whole grand and grand door was added, looking very generous! After reading it, my mother decided to install a door in her own door. What if the master thought such a rich door was like?