How can I adjust the trip?

Five details of the fastening garage door cannot be opened or closes to the bottom of the itinerary.

Flutter Gate is one of the common devices in modern life, but in the process of using, users often encounter problems that the electric door cannot open or close completely. It can be solved by adjusting the itinerary. Today, we will focus on how to solve the problem that the overturn garage door cannot open or be closed by adjusting the itinerary, and reminds you to pay attention to five important details.

1. Electric door-tuning stroke can only be operated on the motor

remote control or other smart devicesIt can only be used to operate the door or close, so if you want to call the garage door, you must first be more clear, you can only adjust the itinerary on the motor. The motor is like a computer host. The itinerary is the screen guarantee. Only when the host is set up can we use the function on the screen normally. In addition, the stroke of the motor needs to form memory on the motor to control the opening and shutdown of the door. Adjusting the itinerary on the motor is directly related to the motion trajectory of the activity door.

Second, the door can be adjusted first

If you first adjust the door, and then adjust the door height, the system cannot store memory normally, or memory can be memory, or memory Disorders, take the door as the door, and then take the door height as a closing position. Doing this will cause the door forever. Therefore, when adjusting the itinerary on the motor, you need to completely close the door first. If you press the remote control door to be closed to the end, you can use the manual closing function, then close the clutch, and then start adjusting the stroke.

Third, the uplink height cannot exceed the limiter

After closing the door, long press the itinerary settings, after the LED light changes, then press the upward key to adjust the itinerary when adjusting the itinerary. You need to pay special attention to the upward height cannot exceed the limiter. The specific operation method is: It is recommended to press multiple keys. Do not keep the door panel quickly open the door. The speed is too fast and dangerous. If there is no installation limiter, in case the door panel is rushed out of the track, the consequences are unimaginable. This is also our previous emphasis on it to install each accessory, especially the limiter, because the limiter is a device for the upper end movement position used to limit the door. Unable to work normally or even damaged.

Press the confirmation key

After the upward keys are adjusted, there is a very important detail to pay attention, that is, when confirming the door to satisfy the height, loosen the upper keys, it must be loosened. You need to press the confirmation key, that is, the settings key, you must not forget this step, otherwise the motor will not remember your settings. A lonely. Therefore, whether it is open to a satisfactory position or a position from the door to strict silk, every time the itinerary is adjusted, you need to press the confirmation key. This can ensure that your settings are preserved and applied to the motor.

5. Detection: confirm whether the position of the opening and closing door is in a satisfactory position

After completing the above steps, in order to detect whether the door can work normally, the switch door position is in a satisfactory position, whether Do I still need to operate on the motor? The answer is: No need. That is to say, after adjusting the height of the door, press the confirmation key, and the door position is also required. The setting of the downstream is similar to the upper stroke, just change the button. That is, \” -\” or \”▽\”. After close the door to the end, press the confirmation key again. At this time, the electric opportunity runs the door automatically. You can first observe the movement of the door indoors to see if the room is strictly seamless after closing the door, and then stood outside the door and press the remote control to run again to ensure that the door can be opened to the top or closed to the end. If you find a problem, check and adjust the itinerary settings again.

Summary: The fastening garage door cannot be opened or closed to the end, and it can be solved by adjusting the itinerary. Pay attention to 5 details. One is to operate on the motor, the other is to close the door first, and the third is that the upward height cannot exceed the limiter. After the settings are completed, the electric opportunity will automatically run the complete opening and closure of the door once. You can stand in the indoor and outdoor to check whether it is turned on or closed to the end. Have you remember?