Generally speaking, the industrial sliding door is stretched by wrapping the wire rope on the wire wheel. In order to achieve different ways of skating, we need to equip industrial sliding doors with different characteristic line wheels. There are three different ways to improve the industrial promotion door, namely: standard improvement, vertical promotion, and high levels. Then, the corresponding one can also be divided into three forms: flat wheels, tower wheels and half tower wheels.
1. flat wheel
The flat wheel refers to a wire wheel that does not change the radius. The length of each circle from the left to right is unchanged. If the load is unchanged, the torque of the line wheel axis will not change. This flat wheel is mainly used for the standard improvement of industrial doors.
2. Tower wheels
Tower wheel refers to the wiring wheels that are gradually increasing. When using this wire wheel, from left to right, the radius of the wire wheel increases in order, and the corresponding perimeter of each circle gradually increases. If the load is unchanged, the torque of the line wheel axis gradually increases. This line wheel is generally used for the vertical improvement of the industrial door of Xufeng (http://www.xufengmy.com).
3. Half tower wheels
Half tower wheel refers to the wire wheels that include both the flat wheel and the tower wheel. At a certain width, the radius does not change, and the upper radius of the remaining width gradually increases. Similarly, if the load is unchanged, the torque of the line wheel axis remains unchanged in the flat wheels, and the part of the tower wheel gradually increases. This kind of wire wheel is generally used in high levels of industrial doors.
本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们：609448834
