The structural feature combination of the fast industrial roller curtain door

The structural characteristics of the fast industrial rolling door door, the upper end structure feature: fast soft curtain door (fast roll roll The transmission mechanism of the curtain door is installed in the upper part of the door frame. The mainstorbox is manufactured by a thick 2mm thick galvanized steel plate. The installation and use of the prefabrication of the system software prefabricated components and the installation of the use of the holes. The thick steel plate is resolved to the color prescribed by the customer. The scroll installation is used in the mainstream, which is composed of roll tube, axis end, bearing seat and other combination. The roll specifications are based on the high door frame and the wide specifications. Based on the calculation, the effective specifications are selected. At this door, the diameter of the roller is 219mm.

Fast Industrial Rolling Trout Guide box: The guide slot box is manufactured by a 2mm galvanized steel plate. The two sides of the door frame are stable on the wall, and the mainstream is placed on the upper end of the tank box to stable according to the screw and guide box and the wall. On the second side of the guide slot, the guide slot is stable and tightened to ensure the sealing regulations. At a distance of about 1m at the bottom of the tank box, the installation and use parts of the infrared induction monitor are embedded. The guide slot box is resolved by static spraying. The same color as the mainstorbox, the brush in the guide slot is against the curtain to limit the curtain and will not get rid of the guide slot. This kind of car will get rid of Guide grooves to avoid damage to door fans.

Factering: Made in the curtains, about 700mm in each section, the cricket alloy of each section of the curtain basis is based on The wind resistance level bar is connected into a overall curtain, with a curtain thickness of 1.2mm, and has the advantages of high pressure resistance, impact resistance, and not easy to penetrate. You can also use Δ = 2mm full transparent PVC material to make cloth curtains or partially selected for all transparent PVC materials to make fabrics to observe the condition of the sides of the soft curtain door. At the bottom of the cloth curtain, the bottom beam of the alloy alloy, as well as non -slip The upper end of the soft bag curtain is stable on the roller according to the screws and pressure strips.

<p data-track =\" 5 \"rolling door promotion device: according to the slowdown according to the slowdown. Madam immediately push The soft curtain door transmission shaft, according to the regulations of the increase, select the reduction motor with the speed ratio, exceeding the specified increase rate, and the rate can exceed 80cm/s above. The manipulation route is controlled by the inverter, so that the cloth curtain can be slowed down when the cloth curtain runs, and the cloth curtain can be automatically stopped in time, and the movement is terminated during operation.

Manipulation: The soft curtain door is equipped with a control cabinet, which can be \”open\”, \”stop\” and \”off\” in the control cabinet operation method The control button operation method \”open\”, \”stop\”, \”off\”. It can be selected for automatic opening and closing the door of the shaking control operation method and radar detection or ground induction coil. On the second side of the door frame, an infrared induction detection device is equipped. When the door fan fitness exercise, there will be an obstacle to cross the rebirth door frame. , Or respond to the opening of the door.