Automatic flat moving door wind dumpling room working principle

Automatic flat-moved door wind dumping room working principle: Automatic flat-movement door style includes single-person wind chamber, double windy chamber, multiplayer wind chamber, full stain Gate windy chamber, explosion -proof wind dumpling room, wind dumping channel, corner wind chamber, steel plate paint style room, qs authentication wind chamber, fully automatic wind dumpling chamber, ozone sterilization wind chamber, electric heating wind chamber, anti -static electricity Wind chamber, cosmetics industry wind chamber, car coating workshop windy room, L -shaped wind chamber, U -shaped wind chamber, heterogeneous wind chamber. Carrier Room Introduction: Cargo Channel, Manual Double Open Door Cargo Room, automatic induction translation of door cargo pillar.

Automatic flat moving door wind dumpling room working principle

data-track = \” 2 \”> Automatic flat movement door induction detector detects someone entering, passing the pulse signal to the main controller. The main controller will notify the motor operation after judging, and monitor the motor to the motor to notify the motor in a certain time. Enter slowly. After the motor gets a certain running current, it is done forward, passes the power to the synchronous belt, and then passes the power to the piano system by the synchronous belt to open the door fan; after the door fan is turned on, the controller will be judged. Turn off the door fan.

Automatic flat-movement door style dumpling room Features:

Controller: This module accepts human detection signals from the sensor, Drive the motor, the motion of the control door and the voltage of 220V without using a transformer.

motor: Using high-efficiency, small volume, and powerful DC brush motor, a spiral gear with high transmission efficiency and small noise in the gear box decelerate.

Hanging frame: This module is equipped with a door, which can be moved on the aluminum guide rail of the case.

Aluminum alloy steel beam: made of high-hardness aluminum, which can be simply cut off. Various opening widths can be adjusted on the spot and used in size.

Stopper: Made of steel plates, it can freely limit the net opening width of the door. The rubber of the stopper can well slow down the impact force.

Synchronous belt (some manufacturers use triangle belt): used to transmit the power generated by the motor and pull the door spreader wheel system.

The sliding door air shower series products realize comprehensive automation of the clean room. The door opens and closes automatically without the need to push or pull by hand. The entrance and exit doors of the clean room can be opened and closed conveniently and without contact, allowing people and goods to enter and exit smoothly, which improves the level of production technology and environmental cleanliness. The guide rail is made of aluminum alloy profile, the transmission structure is reasonable and reliable, and the service life is more than 1 million times. The door body design adopts color steel plate foaming process or large flat matte stainless steel plate or aluminum plate, which has good sound insulation performance. The movable door operates smoothly. It can also be operated with a manual switch.

Automatic sliding door air shower device:

(1) The automatic door air shower can also be set to: manual according to the function There are different devices such as induction door opening, card opening, automatic induction door opening, etc.

(2) There are currently two main types of automatic door air showers: A. Automatic door opening at a 90-degree angle. B. 180 degree sliding door device.

(3) Different brands of air shower automatic doors have different prices.

(4) The system configuration of the automatic door air shower refers to the peripheral auxiliary control devices equipped according to the use requirements and connected to the automatic door controller, such as the door opening signal source , access control systems, security devices, centralized control, etc.

Features of automatic sliding door air shower:

1. Automated control: The system adopts PLC intelligent control means to control The LED display on the panel can correctly display the operating status of the air shower, the interlocking status of the double doors, the progress of the air shower cycle and the delayed door opening status. It is also equipped with a photoelectric sensor and a one-way channel air shower, which can be entered from a non-clean area. After closing the door, the infrared sensor detects someone and starts showering. After showering, the door is locked and the air shower can only be exited from the door;

Automatic flat moving door wind dumpling room working principle

 2. Humanized operation: Humanized control panel design, clear indicator light instructions, giving users clear and correct instructions for the air shower process, soft key touch time relay, LED display and setting blower. The shower time is adjustable in the range of 10-99s. The user can adjust the shower time according to the difference in the external environment of the air shower room;

 3. High cleanliness and high wind speed: It adopts a two-stage filtration system of primary and secondary filters, without partitions and low-resistance filters. The filtration efficiency is 99.99%, ensuring the purification level is all stainless steel. Angle-adjustable nozzle, double volute outer rotor, large air volume and low noise blower, the wind speed at the air nozzle outlet is as high as 25m/s or more, and the wind speed blowing onto the human body is more than 18m/s

4. Modular structure: The air shower box adopts a modular design and can be assembled into air shower sizes of various lengths according to actual needs. An air shower consists of one or more air shower units. Composition, for large-volume air shower equipment, it can be split into multiple modules, making production, transportation, and installation particularly convenient and fast;

5. High performance and high sealing: Using imported electronic components, the operation performance is stable and reliable. The advanced noise reduction and mute device system and the use of EVA sealing materials have high sealing performance.

本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834

(0)
华夏门网's avatar华夏门网
上一篇 2025年1月27日 11:31:17
下一篇 2025年1月27日 11:34:34

相关推荐

  • Qin Shuo Gear teaches you how to install the rack of the sliding door motor

    In recent years, door opening motors have gradually entered our lives. This thing looks very simple, but it is quite laborious to assemble. Especially for sliding door motors, its …

    平移门 2025年1月8日
    420
  • What are the applications for electric sliding doors?

    What are the applications for electric sliding doors? As a manufacturer of electric sliding door motors, Juguang Intelligent Door Control is here to share with you the application …

    平移门 2025年1月27日
    140
  • 平移铝艺大门的安装方法你知道多少

    平移铝艺大门的安装方法你知道多少 随着人们生活水平的日益提高,满足不同客户人群的需求也在不断变化,顺应行业趋势的发展才可以扭转发展企业劣势,那么客户差异化需求中比较常见的问题之一就属于平移铝艺大门的安装了,其中所涉及的一些专业技巧在没有从事过安装经历的人来说,还是有些陌生的,那么今天奉世金属小编就铝艺大门安装方法着重讲讲平移铝艺大门安装的一些思路和方法供大家…

    平移门 2023年10月1日
    610
  • 遵义电动平移铅门价格

    针对射线防护需求,多种材料可选,铅板、铅门、探伤防护门一应俱全。 批量采购:点击询价 放射科辐射防护工程和工业探伤射线防护工程是当今社会广泛应用的两个领域。在这两个领域中,遵义电动平移铅门成为热卖产品,并且以高速直达全国的销售盛况备受瞩目。 遵义电动平移铅门价格高昂,但却是一个非常有效的防护设备。在放射科辐射防护工程中,这种平移铅门可以有效地防止放射性物质的…

    平移门 2023年10月28日
    210
  • 什么是旋转门?HJSJ-2022

    旋转门技术由国外引进,其造型与高格调的设计成为建筑的点睛之笔。 旋转门主要的设计理念是节能,它阻止了建筑物内部和外部之间的直接通道,使它成为缓冲设备,最大限度地减少热量损失。 下面由华建工艺学会、华建环境设计研究所为大家讲述自动旋转门作用与应用! ▷目录 1、什么是旋转门 2、相关规范 3、优缺点 4、使用范围、用途 5、施工工艺及通用施工图 1. 什么是旋…

    平移门 2023年10月23日
    540

联系我们

400-800-8888

在线咨询: QQ交谈

邮件:[email protected]

工作时间:周一至周五,9:30-18:30,节假日休息

关注微信