0098 Stainless Steel Revolving Door Construction Technical Documents

0098. Stainless Steel Revolving Door Construction Technical Documents

Introduction

As an important part of modern architecture, stainless steel revolving doors are widely used for their elegant design, efficient traffic capacity and excellent safety performance. In high-end office buildings, star hotels, shopping malls and other places. This document aims to elaborate on the construction technology of stainless steel revolving doors, including pre-construction preparation, installation steps, debugging methods and subsequent maintenance, etc., to provide comprehensive and systematic guidance for construction personnel.

1. Preparation before construction

1.1 On-site investigation and measurement

• Inspect the installation site to confirm whether the flatness of the ground, space dimensions, power supply location, reserved holes, etc. meet the installation requirements.
• Accurately measure the dimensions of the door opening, including width, height and depth, to determine the specifications and model of the revolving door.

1.2 Material and Tool Preparation

• Prepare the stainless steel revolving door body (including door leaf, central shaft, bearing , transmission device, etc.), control system, induction device, safety protection device and necessary installation accessories.
• Prepare construction tools such as electric drills, level rulers, vertical rulers, screwdrivers, wrenches, welding tools, and measuring tools.

1.3 Construction plan design

• Develop a detailed construction plan based on the site survey results and revolving door specifications , including installation location, fixing method, power wiring, etc.
• Ensure construction plans comply with local building codes and safety standards.

2. Installation steps

2.1 Install the central shaft and bearings

• Fix the central axis at the center of the door opening according to the design requirements to ensure that the axis is horizontal and stable.
• Install the bearing and adjust its position to ensure that the revolving door can rotate smoothly.

2.2 Assemble the revolving door body

• Assemble the stainless steel door according to the instructionsThe sash, frame and other components are assembled into a revolving door body.
• Check whether the connection of each component is firm and whether the door leaf is flat and without deformation.

2.3 Installation of the revolving door

• Hoist the assembled revolving door onto the central axis. And tighten it with bolts or other fixing methods.
• Adjust the position of the door body to ensure that the door leaf is parallel to the ground and the door frames on both sides and the gap is even.

2.4 Install the control system and sensing device

• Install the control system in a location convenient for operation and maintenance , connect the power supply and communication lines.
• Install sensing devices (such as infrared sensors, microwave radar, etc.) to ensure that the sensing range covers the entire traffic area.

2.5 Debugging and Testing

• Turn on the power, start the control system, and conduct preliminary debugging of the revolving door .
• Test whether the automatic rotation function, manual control function, sensor opening function, etc. of the revolving door are working properly.
• Check whether the safety protection devices are effective, such as whether anti-pinch sensors, emergency stop buttons, etc. are sensitive and reliable.

2.6 Site Cleaning and Acceptance

• Clean the installation site and remove excess materials and tools.
• Conduct a comprehensive inspection of the entire system to ensure that it is correct before acceptance and delivery.

3. Debugging and maintenance

3.1 Debugging method

h1>

• Adjust the sensitivity and sensing range of the sensing device according to actual usage conditions.
• Debug the rotation speed and start-stop smoothness of the revolving door to ensure there is no noise and jitter during operation.
• Check the transmission and bearings for wear and replace or maintain them if necessary.

3.2 Post-maintenance

• Regularly check the tightness and connection status of each component of the revolving door, and promptly Repair or replace damaged parts.
• Clean dust and stains on the door surface and glass (if any) to keep the door clean and beautiful.
• Regularly conduct software upgrades and hardware checks on the control system to ensure stable operation of the system.

4. Safety precautions

• Strictly abide by safety operating procedures and wear protective equipment during the construction process.
• Ensure safe and reliable power supply at the construction site to avoid electric shock accidents.
• Pay attention to safety when working at heights and prevent falling accidents.
• During the debugging and testing stages, ensure that no one is close to the revolving door to prevent accidents.

5. Conclusion

The construction technology of stainless steel revolving doors involves many links and details, which requires construction personnel to have solid knowledge. Professional knowledge and rich construction experience. Through the guidance of this document, construction personnel can more systematically master the installation, debugging and maintenance skills of revolving doors to ensure construction quality and construction safety. At the same time, regular maintenance in the later period is also an important measure to ensure the long-term stable operation of the revolving door.