Is the bathroom equipped with a squat pit or a toilet? I think more people will choose to install toilets, but compared with rural areas, squatting is actually much more popular. Don’t mistakenly think that rural areas are still old-fashioned toilets. Now basically every household has running water and a bath. Tool. My father also installed a squat pit with a water tank in the bathroom at home. The installation was very simple and he installed it successfully by himself.
What are the advantages of a squatting pit with a water tank compared to a toilet?
Squatting in a pit with a water tank is actually more ergonomic. Squatting to the toilet is better for your health than sitting on the toilet. However, sitting in the toilet for a long time may cause hemorrhoids, constipation, etc. Physical illness, so the squatting design is more suitable for the public. Chinese people are more accustomed to squatting to the toilet.
But maybe young people still prefer flush toilets, mainly because there are various types of toilets, and there are smart toilets, which are convenient to use, have a good experience, and are automatic The toilet seat you wear can block odors and ensure the cleanliness of the bathroom, which is exactly what squatting does not have.
So our parents want to install a squat pit with a water tank like this in their hometown. It is better to add a squat pit cover.
Having said all that, how do you install this squat pit with a water tank in the bathroom? Follow the steps below and you can install it yourself without spending a penny.
1. Prepare pits, water tanks, pipes and tools
2. Dig down at the sewage outlet
Cut off half of the pipe at the sewage outlet to facilitate connection with the pipe, and bury the pit in advance.
3. Measure the hole distance of the pipe
Note that the hole distance of the squat pit needs to be consistent with the hole distance of the pipe, about 10 centimeters, so that Just installed.
4. The sewage pipe is connected and fixed with the squatting pit
Use elbows and connectors to fix it with the squatting pit.
5. Use cement for pre-embedding
Because there is a certain height difference between the squatting pit and the ground, cement needs to be used for in-situ pouring to allow squatting. The pit blends into the cement floor.
6. Wait until dry before laying floor tiles
There is a groove reserved between the squat pit and the ground to connect the squat pit and
7. Connect the squat pit and water tank
Find an elbow of suitable length and use special glue , connect the elbow to the squatting pit first;
Connect the other side of the elbow to the water tank.
The water tank is fixed on the wall with screws.
8. Fill the grooves
First fill them with sand, and then attach floor tiles.
本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们：609448834
