Molded door panels, also known as blister panels, are generally made of medium-density boards. They are produced by a vacuum blister machine using one-time or two-time molding technology in a high-temperature and high-pressure environment.
What are the advantages
1. Rich texture performance
Compared with other door panels, cabinets made of molded panels have a rich variety of colors, bringing consumers More choices, the color and texture of molded door panels are determined by the PVC film covering the surface. Molded door panels can be made into various three-dimensional shapes to match various home decoration styles.
2. The quality of the door panels is stable
The molded kitchen cabinets not only have good stability, but also are not easy to deform, crack, or warp after long-term use, because the molded door panels can be formed by blister molding. The four sides of the board are sealed as one, which effectively solves the problems of glue opening and moisture.
3. Good heat resistance and wear resistance
The kitchen is a place with a lot of oil smoke, and the knives we use daily are also prone to wear and tear on the cabinets, but the molded door panels can solve these problems very well It has good wear resistance and heat resistance, no deformation or cracking, and simple daily maintenance. As a relatively mature cabinet material on the market, molded door panels are the first choice for home customization.
What are the disadvantages
1. Poor high temperature resistance
A large number of open flames are used in the kitchen, which easily generates high temperatures. Since the base material of the door panel is wood, the surface is attached PVC film has poor high-temperature resistance and cannot be exposed to high-temperature objects for a long time, otherwise it will deform. Therefore, molded cabinets should avoid long-term contact with high-temperature objects.
2.DesignNot too long
The design of the molded cabinets should not be too long, otherwise it will be easily deformed. The molded door panels are hot-pressed, which will cause thermal expansion and contraction. After cooling, they will dent in the direction of the PVC film to varying degrees.
How to maintain molded door panels
Maintenance measures for molded door panels are indispensable. You need to pay attention to the following points:
The surface of molded cabinets cannot be scratched by sharp objects. For surface dirt, the surface of the door panel cannot be scrubbed with high-concentration detergent. It can only be wiped with warm water and a little detergent with a clean soft rag. Surface stains or oil stains should be cleaned within 12 hours.
The above has given you a detailed introduction to the relevant content about molded door panels. I hope the above content can help you.
Some of the text comes from the Internet. If there is any infringement, please contact us to delete it!
本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们：609448834
