When choosing a custom wardrobe, don’t choose these 5 points. They are not misleading, they are lessons learned from those who have experienced them.

When decorating your home, you basically need to install a wardrobe.

Customized wardrobes are currently the most popular. But if you don’t know how to choose, it will not only cost money, but also look ugly and difficult to use.

There are 4 things you cannot choose when buying a custom wardrobe. This is not misleading, it is the experience and lessons of those who have experienced it. So I will share it with you one by one below, hoping that everyone can avoid pitfalls.

㈠: Do not select wardrobes with edge strips

When we buy a customized wardrobe, the first thing everyone pays attention to is whether edge banding is required for the installation of the wardrobe.

For custom wardrobes installed on site, edge strips need to be added. It is recommended that you do not choose.

The so-called edge banding strip on the wardrobe site means that when we install the wardrobe, because the gap between the wardrobe cabinet, the top plate and the wall is too large, it needs to be Use lath for edging.

The presence of edge strips between the custom wardrobe and the wall and ceiling will inevitably cause the following problems:

①. The integrity is very poor. It can be clearly seen that there are two gaps between the wardrobe and the top plate of the wall. The effect of a wardrobe with one door to the top is obviously reduced.

②. Too many gaps will affect the appearance.Because too many gaps between our wardrobe and the wall are very unsightly.

So when buying a wardrobe, everyone must ask clearly: Does our customized wardrobe rely on the cabinet and wall and the top panel.

If the manufacturer is vague when purchasing, it means that they are not sure about the customized wardrobe at this time. This kind of wardrobe

㈡: Do not select if the wardrobe hardware is unclear

A very important component in the wardrobe is the wardrobe hardware

When purchasing a customized wardrobe, if the hardware of the wardrobe is unclear, do not choose it.

This is because during the use of wardrobe hardware, the following situations may occur due to quality problems:

①. The wardrobe door is not closed tightly. This is a relatively common situation. It is caused by a slight shift in the hardware of the wardrobe.

②. The gaps in the wardrobe doors are deformed. This situation is very common. After the wardrobe in our home was installed, it felt that the overall gaps were relatively even, but after leaving it for a while, we found that the gaps were narrower at the top and wider at the bottom. This is also caused by problems with wardrobe hardware.

③. There is another problem with wardrobe hardware, that is, when opening the door There was a loud noise when closing the door.

So when purchasing a customized wardrobe, if the manufacturer cannot clearly identify the hardware used, then we will not choose this kind of wardrobe .

When purchasing a customized wardrobe, you need to be clear about the brand and material of the hardware.

I personally recommend that you choose more well-known brand hardware. The material must be 304 stainless steel, never aluminum alloy.

㈢: Wardrobe style cabinet door is not selected

In fact, one of the more important aspects of the overall effect of customization is the wardrobe door.

Because after the wardrobe door is closed, we Most of the things you see are cabinet doors.

So, there may be a situation where you want to choose some special-shaped cabinet doors.

However, for Wardrobe doors with convex and concave shapes cannot be selected.

Because wardrobe doors with convex and concave shapes must have the following problems:

p>

①. Dust accumulation This is also a common problem. The convex and concave parts of the door are not a flat surface, and dust will fall on them.

②. The price is high. If you compare different wardrobe doors, you will find that the price of shaped wardrobe doors is much more expensive than flat cabinet doors.

So, when we customize the wardrobe, we must clarify the form of the cabinet door. If we can\’t figure it out, don\’t choose it.

For custom wardrobe doors at home, it is recommended that you choose flat-panel doors. We can choose any texture and color.

㈣: Small handles and full-length handles are not selected

In the wardrobe, one very important aspect that reflects the effect of the wardrobe and its use is the wardrobe handle.

The handles of wardrobes have changed a lot now. From the traditional hand-pull handle, full-length handles and miniature handles gradually appeared.

If we find when customizing the wardrobe, we choose full length It is recommended that you do not choose handles or miniature handles.

Because the wardrobe chooses full-length handles and miniature handles, the following problems will generally occur:

①. It is difficult to match the effects. If you install a regular handle in your home, you will find that the handle is very obvious and incompatible with the overall interior decoration. If it is a miniature handle, it feels very awkward.

②, the price is high. In particular, handles are usually much more expensive than ordinary handles. Personally, I think there is no need to invest in this aspect, it is just flashy.

So, when we choose a customized wardrobe, we must be clear The type of handle provided to avoid the need to replace the handle later.

For wardrobe handles, it is recommended that you choose the more popular 1m long handles, or choose invisible handles.

㈤: Do not select if there is on-site processing

Customized wardrobes, as the name suggests, are customized according to the size of our homes.

Customized wardrobes, strictly speaking, can only be made in our homes. Assembly occurs. Instead of using a woodworking electric saw for cutting.

If we customize the wardrobe at home and find that the boards need to be cut on site, it is recommended that we do it in time. Stop.

So, if we buy a customized wardrobe at home, we must ask in advance whether on-site processing is required. If the manufacturer says that some boards need to be processed on-site according to size, it is recommended that you do not Choose this company.

Customized wardrobes processed on site must have the following problems:

①. It seriously pollutes our indoor spaces. Because the boards are cut on site, the sawdust flies around, which will pollute the walls and ceilings of our homes. And there is a very Serious drama smell

②. The seam processing is very ugly.Because it is cut on site, it is not as uniform as machine cutting. As a result, the positioning effect of these slats is very poor.

③ Most of the edge sealing is not done, and there are cases where pollutants exceed the standard. Because after cutting the board, the edge sealing is cut off, and it is difficult to seal the edge on site. p>

So, try to customize the wardrobe at home and do not let carpenters use electric saws to cut boards at home.

When we customize the wardrobe, we must ask whether it is only assembled at our home and we agree in advance that cutting the panels at home is not allowed.

Conclusion

When decorating and purchasing customized wardrobes, we should not only focus on price and effect, but also pay attention to the details.

So, in this article, I will introduce you to 5 things you should not do when choosing a custom wardrobe. These are the experiences and lessons of people who have experienced them. I hope you can summarize them. Use these lessons to avoid further mistakes.

[Personally created, pictures are from the Internet, and will be deleted if there is any infringement]