General construction drawings of invisible doors

With the popularity of minimalist decoration style, it has modern design The sense of invisible doors is becoming more and more popular.

The following is an introduction to the construction of invisible doors by Huajian Craftsmanship Society and Huajian Environmental Design Institute Craft guide!

▷Directory

1. What is an invisible door

2. General sample drawing of invisible door

1. What is an invisible door

01 Invisible door:

If a door is installed in an important position, it will affect the overall beauty, so designers will use invisible doors in a certain area. Invisible doors will appear in common hotel lobby backgrounds, image walls, and background walls, the appearance of invisible doors does not affect the overall look and feel, but also meets functional requirements.

Principle: The invisible door will The finish of the door is integrated with the surrounding wall, making it difficult to tell that it is a door unless you look closely. , making the door visually hidden in the wall finish, and becoming more modern and design-friendly.

Decorative surface: Common ones include wood veneer, stone, wall covering, wall panel, glass, etc.

02 Comparison between invisible doors and ordinary doors:

The main differences between invisible doors and ordinary doors are:

1. Door pockets and door panels:

Ordinary door The edges on both sides of the door panel are flat, and the side of the door frame that is not open protrudes , to prevent the door from sliding.

Invisible door\’s door panel and door frame interlock with each other like gears. The door frame and door leaf need to be made with stops on three sides (top surface and both sides). span>

2. Hinge:

Invisible The door hinges can be connected using concealed cross hinges and sky-earth axes.

Explanation of the name: The stop is commonly known as the Yin and Yang kan, the convex stop is the yang kan, and the concave stop is the yin kan.

△Contrast between invisible doors and ordinary doors

2. General sample of invisible door

01 Invisible door (opening inward):

a Construction sequence:

Preparatory work→On-site laying out→Material processing→Basic base treatment→Structural frame fixing→Wall surface modeling treatment→Installation of wooden secret doors→Complete surface treatment.

b Key points to note:

1. The entire door size and opening Sizes match;

2. The door fitting joints should be tight, smooth and without black seams.