Is it okay to use the ward door as a double door?

Is it good to use the ward door as a combination door?

Any ward door with a size between 1000mm-1500mm can be used as a combination door door.

Usually the size of the double-opening ward concierge door is between 1500mm-2000mm, and the normal single-opening ward concierge door size is between 700mm-1000mm. -1500mm, usually double and double doors are made.

1. Advantages of double and double ward doors

1. Easy to use

The main door of the ward door is very convenient in use. You can choose to open the door when moving things. In daily life, just use the small door when passing through. Therefore, this kind of door is one of the more practical and convenient ones among the many doors now. It deserves everyone\’s attention and will make life easier.

2. Stylish and stylish

If the house is large enough, then choosing a double-sided door will definitely make the whole decoration more stylish. High-end, especially in places with large living rooms and relatively high floor spacing, choosing such double and double doors will definitely become the finishing touch in the decoration, making the owner\’s entire decoration look more impressive.

2. Design and installation requirements for ward doors and sub-doors

1. In order to meet the usage requirements and aesthetic requirements of residents, The reserved openings and installation accuracy for the installation of the ward door entrance letter door need to be further improved. When the standard for residential housing delivery is the structural surface layer, the height of the ground decoration reserved for residents is usually 50mm. When the middle insulation layer + protective layer is used, the ground decoration height is usually 30mm reserved for residents.

2. Double and double doors generally have wider door openings. For the sake of overall beauty, the door leaves are designed in the form of letters, one large and one small. When designing, you need to understand that the width of the double and double doors is larger than that of an ordinary single door. Width, between 800-1000mm, It is less than the total width of the double door, between 2000-4000mm. In this case, the double door can be used. When family members open and close the door, there is no need to use a large door, or the double door is generally too small and inconvenient to pass, etc. Question; if large objects need to pass through, all can be opened.

3. When installing a single door, a double door or a double door, you need to check the accuracy of the door frame device first.Any small deviations in the door frame in any direction must be taken into account when installing the door. When installing the sub-door of the ward door, first install the sub-door, the upper and lower latch holes of the sub-door, and then install the main door; after installing the sub-door, remember to reserve the width gap of the main door. If the upper and lower sides of the door frame are the same, I wonder, where are the two doors? When hanging the hinges, they can be hung at the same height. If they are not the same, corresponding adjustments must be made to make the heights of the two doors consistent. When installing the hinges, there is no need to rush to install all the screws. Just hang one or two screws on each hinge first, so that it is convenient to adjust the dimensions of the inside and outside, left and right, height, etc. of the ward and sub-doors; install the hinges of the ward and sub-doors. It\’s all relative.