How to use and maintain the flip garage door

Daily maintenance and maintenance methods of the door-in-door of the flip garage door

Flip garage door, especially the movable door-in-door, needs to be used in strict accordance with certain operating specifications in daily life, and when it is installed and delivered for use, the owner must be trained on-site. You can only sign for confirmation after personally experiencing how to use it. Moreover, care and maintenance during use are very important, either to extend its service life or to ensure safe use.

How to use

Mobile door-in-door:If the door-in-door on the flip garage door is a movable design structure, you should pay attention to three details when using it: first, the small door must be closed when opening the door; second, the small door must be opened alone The gate must be closed at all times; third, the gate or small door needs to be separated The first two principles must be followed when opening. The installation principle of the movable small door is that the door opening is not too wide, but you want to add a door in the door to facilitate occasional pedestrians\’ entry and exit, so you will set a width of about 80-90 cm.

Movable small doors basically retain the bottom threshold. The threshold is usually set by retaining part of the bottom door panel. Therefore, the disadvantage of this design is that it only supports people or pets who can lift their legs to cross, but it is not convenient for wheelchairs. To get in and out, you need to lift it in and out like a bicycle.

Fixed small door:The door opening has a large span, such as a large-span door opening with two parking spaces or more than three parking spaces. Independent fixed small doors can be opened on the left and right sides of the garage door. The opening method can be either outward or inward opening. , and can also be used separately from the main door. The fixed small door can be set up without a threshold to facilitate the entry and exit of wheelchairs and electric door motorcycles.

Maintenance

After the door-in-door is opened in the flap garage door, the operating noise will be louder than that of the ordinary flap door. The reason is that the frame and accessories on the door-in-door increase the weight of the overall door, and the weight is transferred to the motor. The load-bearing capacity becomes larger, so the silent operation is slightly worse.

If you feel that the noise is getting louder and louder during use, it is recommended to regularly apply special lubricant or butter to the door track. This can reduce the friction between the track and the door and make the door run more smoothly. Smooth and extend the service life of the motor. Also keep an eye on the hinges and connections in the door to make sure they are tight and not loose, use appropriate tools to tighten them.

Check borders

Check whether the seal between the door in the door and the main door is intact, and whether there is any damage to the frame or protruding door handle. If there is a problem with the seal, tighten it in time to Ensure the sealing performance of the door to prevent the door from colliding with obstacles such as fixed door heads, secondary beams or other firefighting pipes, causing extensive damage.

Check whether the door lock of the door-in-door is working properly, and ensure that the lock core is flexible and the handle is smooth. If the door lock fails, it should be repaired or replaced in time to ensure that the door-in-door can be used normally.

Notes

Toggle on and off:When using the door-in-door, you should open and close it lightly to avoid using excessive force or hitting the door. In serious cases, the door panel may be deformed. Or it may become loose. Opening and closing lightly can reduce damage to the door and door connectors and extend their service life.

Avoid overloading:Do not hang anything on the door handle to avoid damaging the door structure and components. At the same time, avoid piling debris under the door to avoid affecting the normal operation of the door.

Prevent collision:When entering and exiting the garage, pay attention to avoid collisions between the vehicle and the door. Obvious signs and warnings can be set up in the garage to remind drivers to pay attention to the location of the door. .

The door-in-door of the flip garage door requires professional training and personal experience before it can be delivered for use. After delivery, attention should be paid to daily care and maintenance of the door-in-door of the flip garage door. , especially strictly follow the operating instructions to avoid the door body of the newly delivered garage door falling or the accessories being damaged due to improper use. Only in this way can the integrity and normal operation of the door in the door be ensured and its service life be extended.