2 simple ways to install curtains. You can install them at home at a glance, which is environmentally friendly and saves money.

A friend bought a suite in the suburbs. Although the dining room windows were equipped with blinds, the blocking effect was not good. My friend wanted to hire a master to install blackout curtains at the end of the year. After I found out, I objected to him hiring a master to install them. Curtains, labor costs + curtain fees are hundreds of dollars, which is not cost-effective. It is better to install them at home using stainless steel pipes or PVC pipes. It costs no money and the installation is super simple.

Hearing what I said, my friend was moved. How to install it using just these few pipes?

The first method: Use stainless steel pipes as curtain rod installation

1. First make auxiliary tools

Use carton boards and follow the instructions Cut the angle of the window style (if it is a flat window, this step can be ignored) to form a cardboard template. If one piece of cardboard is not enough, you can use small clamps and nails to pin the cardboard together to form an angle that matches the window.

2. Secondly, process the stainless steel pipes

According to the window style and the carton template cut in advance, according to the corresponding angle, straight stainless steel pipes The pipe becomes curved to achieve a curvature. Take a convex window as an example:

Just bend 120 degrees on both sides of the stainless steel pipe.

3. Start installing curtain rods and curtains

Curtain fabrics canIt doesn\’t cost much to buy the finished product. Of course, you can also use scrap fabric to cut a piece according to the curtain.

Install the hanger on the window, then hang the bent stainless steel pipe and seal both ends;

Use the hook to thread the curtain cloth and hang it on the stainless steel pole. Can.

Second type: Use PVC pipes as curtain rod installation

1. Processing PVC pipes

Select several PVC pipes with a diameter of 2.5cm, measure the size of the top surface of the window, and then cut the PVC pipes;

If the window is a bay window or recessed window If so, the PVC pipe needs to be cut off, connected with a tee connector in the middle, and sealed at the front and rear ends.

2. Install curtain rods and curtain cloth

Install hangers on the windows and hang the pipe hangers. Then use the curtain hooks to hang the curtains.

These two methods are very simple and can be done by yourself at home. Moreover, hiring someone to install the finished curtains you buy contains formaldehyde and other pollutants, which is not environmentally friendly. It costs money!