Ward door

What is the ward door?

The ward door is the room where patients are placed in the hospital room.

Doors are generally the main part that connects the inside and outside of the house. They are also an indispensable part to promote smooth flow and ensure the complete and independent use of the house. Ward doors play a very important role in a special environment like a hospital. If the environment between patients cannot be isolated, viruses and bacteria can easily cause secondary damage!

Introduction to ward doors

Ward door classification: double and double doors, single door

Threaded medical ward door leaves come in a variety of colors and wood grain surfaces. You can choose from a variety of color combinations. The same door can be equipped with anti-collision strips, glass windows, etc. to meet the needs of different places.

Ward door performance: environmentally friendly, anti-corrosion, flame retardant, fireproof

This utility model uses conch ecological board, which is a Natural antibacterial, moisture-proof and antibacterial material, with a water absorption rate of only 0.35% and flame retardant properties.

Ward door setting plan:

The design of the spiral ward door takes into account that the opening and closing action is prone to collisions with patients in wheelchairs. To avoid the danger, the wall width on the side of the door handle should be 450 mm to allow a person in a wheelchair to open the door near the door handle. After the gate is opened, the clear width shall not be less than 800 mm for passage.

All in all, in order to protect the health of patients and caregivers, we need to ensure the quality and performance of ward doors. This is crucial!

Understandable technical standards and parameters of ward doors

1. Basic requirements

1. The thickness of the hospital ward door leaf is >40mm, and the thickness of the door leaf steel plate is >08mm. There are no exposed screw holes, welding spots, or welds to ensure the overall strength of the door leaf.

　2. Surface material: Cold-rolled and hot-dip galvanized steel plate produced by first-line enterprises, which is flat, smooth and has strong adhesion.

3. The thickness of the ward door frame steel plate is >1.5mm; it uses cold-rolled hot-dip galvanized steel plates produced by first-line steel companies, and provides all-inclusive wall door frames according to various wall thicknesses on site ( Integrated door cover), horizontal and vertical frames are 45 degrees diagonally opposite;

4. Surface treatment: Use spraying equipment for electrostatic spraying. It is required to be dust-proof and anti-bacterial. The spraying surface should be smooth, the spraying thickness is 265um, and the color should be decided by the owner.

5. Equipment Window: The window adopts >5mm tempered glass window, the window bead is aluminum alloy bead, the window is circular or oval, and there are no screws or welds on the surface.

6. The filling material of the hospital ward door leaf: Made of brand-name high-strength honeycomb cardboard or wooden board, and fully bonded with the steel plate to ensure the strength of the door panel and no hollow sound when knocked.

7. The overall requirements for the hospital ward door: the appearance should be smooth and smooth, without dents or damage, the coating should be uniform, smooth, and flat. There should be no piles of paint, pitting, bubbles, etc. The door leaf should be distorted. The bending degree is less than 3mm, and the curvature in the height and width direction is 2%%.

8. The connection between the door leaf and the door frame of the hospital ward needs to be equipped with three-sided sealing strips, and the sealing strips adopt glue-free embedded technology.

9. Door frame installation deviation: the width of the door frame is ±1mm, the verticality of the two vertical frames is <2mm; the diagonal difference of the door frame is <3mm.

10. The internal lining of the door leaf needs to be thickened at the owner\’s request.

11. The bidder is responsible for supplying and installing hospital ward door leaves, door frame covers, windows, blinds and hardware.

12. Control hardware configuration requirements:

(1) The hinges, locks and other hardware accessories of the hospital ward door adopt 304 stainless steel material must provide a test report that complies with relevant certifications, and requires an internal ballast seal.

(2) Hardware brands must choose European standard imported brands. It should be clearly stated in the bidding documents that the selected brand and model must be confirmed by the tenderer before formal installation.

(3) Hospital ward door hardware, accessories, and fasteners should meet functional requirements, be installed in correct, complete, and firm locations, have sufficient strength, and be flexible in opening and closing without any friction. noise.

13. The technical standards for hospital-specific bathroom ward doors are the same as those for medical ward doors, and the style is bottom blinds.

14. Corresponding samples need to be provided according to the above technical standards.

15. Provincial level (provincial level or above ) Steel interior door inspection report issued by the quality inspection department

What are the characteristics of the most common ward doors in hospitals?

The medical doors used in hospitals have special differences. For example, the radiation doors in the radiology department and operating rooms require strict protection. Airtight doors and ward doors. Today we will introduce the most common ward doors in hospitals. What are their characteristics?

(1) They need to be waterproof and moisture-proof. Characteristics

Daily cleaning of hospital doors is a very troublesome task. Ward doors are not waterproof or moisture-proof. In mild cases, they may bulge, and in more severe cases, they may become moldy and rotten. It must be waterproof to a certain extent.

(2) Solid stability

People come in and out of the ward every day. Medical personnel check, inject drugs, doctors check beds, relatives visit, and hospital ward doors need to be opened and closed every day. If the door frame and door are not strong enough, there will be problems with the use of the door.

(3) Anti-collision, scratch resistance and corrosion resistance

Hospital ward doors will inevitably be hit by hard objects such as hospital beds and wheelchairs. The hospital is also a public place. If the collision resistance of the hospital\’s special door is not enough, it will inevitably happen. Can cause problems with the door.

In addition, hospital ward doors need to be disinfected and sterilized every day. Sweat corrosion on the human body is also very serious. Sweat erosion in hospitals will undoubtedly cause the doors to fade. . Therefore, ward doors must be impact-resistant, scratch-resistant, and corrosion-resistant.