What features do automatic doors have?

It has the characteristics of reliability, simple and clear construction, safety, multi-purpose and long life.

First, reliable

1. Control board structure adjustment, Durability and difficulty in system failure

Optocouplers are used at the control loop contacts to remove the physical electrical equipment contact points that are prone to system failure, allowing physical Increased usage stability.

2. The switch is smooth and quiet

The switch behavior can be adjusted according to the shape of the door leaf and the scene. There is also an automatic control system to avoid erratic behavior even when used in rapid reversal. When the operating pressure increases due to air pressure, there is also a self-correcting effect of electric power to always maintain smooth use.

3. Prevent the door leaf from falling off

New structure and new materials will resolutely prevent the door leaf from falling off. The construction of automatic door engineering is simple and clear.

Second, automatic generator set.

1. The controller setting is simple and clear. Use the controller to set the basic parameters. You only need to enter the door fan weight. If necessary, you can also make detailed and accurate settings as needed. The opening and closing frequency and system failure history can be displayed separately.

2. Easy to install and operate

Just install the main chassis on the front main beam, and then install various controls The module is quickly placed into the main chassis. The wiring also adopts the power plug socket method that can be plugged in to simplify the construction.

3. The door leaf hanging adjustment is simple

With the automatic door technology, the door leaf can be adjusted at the door during any free time. In the case of leaf hanging type, only tighten one anchor bolt to adjust. All can be adjusted to ±3.mm.

Third, safety

1. The sensitivity of obstruction is higher Smart

Five levels of compression adjustment, smart and wide matching range. With security return or suspension function.

2. Easy to open after power outage

The door pressure is greatly reduced, with a minimum force of 2..8 kg. Make sure it is easy to turn on when the power is off.

3. Auxiliary light sensor 2. Blocking slogan

There are two auxiliary light sensors prefabricated inside the control panel signal booster, add it anytime, anywhere.

4. Equipped with a variety of high-performance controllers

With infrared sensor and new microwave controlDevice, select according to the purpose of different addresses.

Fourth, multi-purpose

1. Function expansion control module

It can be combined with functional switches, smart locks, batteries, etc. to achieve sufficient uses.

2. Function key expansion control module

Can achieve multi-door linkage, electronic doorbell reminder, prompt tone, intermediate supervision, etc. effect.

3. Semi-closed fan opening

The combination of external power switch and controller can reach the door opening 2.0%-90%, the low energy consumption effect is very good.

Fifth, long life

1. Pulley

The automatic door is made of new materials, and the physical properties are 2. times greater than expected. The casing can be replaced to save costs.

2. Motor belt pulley plating

Motor drive system wheel plating makes the motor belt pulley physically A huge increase.

3. Control panel and motor cooperate to extend service life

Load current, large current technology Solution, making cooperation more reasonable and long life. \”Link\”