Whole house custom cabinet doors, which one is better?

There is a special album for whole-house customization, which covers all the knowledge of whole-house customization. You can browse it by yourself. Today we will systematically plan and share common sense about custom cabinet doors for the whole house.

Because most of them are just needed, we will not talk about so-called high-end products today, but only cabinet door products suitable for ordinary people.

Generally, if necessary, cabinet doors can be usedMulti-layer board, blister, PET cabinet door, three types can fully meet the strictly needed functions.

First, blister cabinet door

Blister cabinet door , the base material is high-density board, which can be made asflat panel Also anyStyling;Surface High-temperature absorbing film can be madeBright lightandSkin feelSeries. The general plate size is 1220mm*2440mm.

▲As shown in the picture, the blister cabinet doorSkin-feel panelCabinet door, visually clean and textured It is also smooth, with no handle rebounder design, very attractive

▲As shown in the pictureBlister cabinet door with shapeDesign, you can also choose from various colors.

▲As shown in the pictureBlister high-gloss cabinet doors, can be used anywhere. It is easy to take care of when used in the kitchen, but high-gloss blister also has disadvantages. High-gloss is not resistant to scratches, very short timeSide They all look scratched, because high light will inevitably make scratches more obvious, and there are gains and losses.

▲Blister cabinet doorCross section, the base material is high-density compression board, so it can be used Computer engrave any shape

▲There is another advantage of blister cabinet doors,Made as an integral shutter door, very unified, such as cabinet natural gas meter louvers, shoe cabinet louvers, etc. This is an effect that is difficult to achieve with other materials.

▲As shown in the figure, the blister flat panel series, the natural gas meter shutter door, the overall material and color are very uniform, visually more beautiful

▲As shown in the picture, the blister door shoe cabinet can be made into fake louvers or real louvers for ventilation. The material is very uniform. This is an advantage that other materials cannot satisfy.

▲The color of the blister door can reach thousands of colors, which is very rich and can meet the needs of almost all customized styles; it can also be used as a bathroom cabinet door, with good appearance and effect.

Second, multi-layer cabinet doors

Multi-layer cabinet doors are solid wood multi-layer cabinet doors. The color is the same as that of blister, but there are not as many varieties as blister. Most of them are wood grain color and few solid colors. The general plate size is 1220mm*2440mm.

▲Bathroom bathroom cabinet door flat panel series uses multi-layer cabinets and cabinet doors with uniform materials. As long as the edge sealing of the artificial boards is not damaged and does not soak in a large amount of water, there will be no problems; it can have various wood grains Color, if it meets the condition of natural wood color, is sometimes more beautiful than solid wood and more suitable for matching

▲Generally when matching wood and white in the kitchen, multi-layer cabinet doors can be used for base cabinets, which are more resistant to bumps, and the wood texture is more realistic and natural than blister; wall cabinets can use solid-color blister doors Or PET cabinet doors because there are few solid color series with multiple layers, and they cannot satisfy the softness and grade of skin feel

▲When making wooden cabinet doors for wardrobes, multi-layer cabinet doors are generally chosen to be enough to withstand bumps and have more realistic and natural textures than blister; however, multi-layer cabinet doors should not be too high, otherwise the chance of deformation increases.

▲Made in wood color series The cabinet door also needs to be shaped, unless it is made of blister or solid wood,Neither multi-layer nor PET can meetthis requirement.

Third, PET cabinet door

PET cabinet door, base material It is a high-density board that can be madeTablet, Unable to shape; can makebright lightandSkin FeelSeries . You must have heard of marble cabinet doors. In fact, they are similar to PET. The only difference is that the high-gloss series of marble cabinet doors use UV paint, while PET uses plastic. It sounds cheap at first, but it is very environmentally friendly because everyone drinks it every day. The mineral water bottles are made of PET, and the plastic bottles used in various medicines are almost all PET.

The color purity is high, and it can be used as a cabinet door surfaceBright and soft lightThe effect is the skin feel effect; compared with marble cabinet doors,The environmental protection is slightly higher; marble high-gloss cabinet doors mainly imitate stone textures, but with the improvement of aesthetics, solid colors are more acceptable.

PET is acceptable in terms of specificationsMake it 2.7 meters, so this is incomparable with multi-layer and blister, but it is not recommended to do it so high, as the chance of deformation is too high.

▲The left is the blister cabinet door, the right is the PET cabinet door,The obvious difference between the two is the edge sealing; BlisterBecause it is coated, the edge sealing around the cabinet door cannot be seen on the front of the door. , but PET, like multi-layer, has edge strips, so The edge banding strip can be seen on the frontThe thickness and traces; especially pure white PET, because the edge banding strip is only similar to the color of the cabinet door, it is very obvious.

▲It’s just edge-sealed with the same color, so you can’t see it unless you look carefully. Compared with blister, PET has better resistance to bumps, the soft light effect is slightly better than that of blister; but high-gloss board is not as good as blister Like plastic high gloss, not resistant to scratches

▲PET soft light cabinet door, with edge sealing of the same color, but you can’t actually see it unless you look carefully.

▲PET high-gloss cabinet door, hiThose who like bright lights can try, but scratches are inevitable

▲When encountering PET with shutter doors, this timeNot as beautiful as blister , it must be made of PET as a frame and embedded with aluminum alloy louvers of various colors. The appearance is not as good as the uniform material of blister.

▲The same is true for multiple layers, and can only be framed with aluminum alloy louvers like PET. .

Also commonly used are metal and glass doors, which are also very attractive in whole-house customization. You can refer to this article \”Whole House Customization, Do You Use Glass Doors in Your Home\”

Original album catalog, constantly updated 12.29