Beware || The ten most common mistakes in decoration! Three tips for choosing flooring

Myth 1: The entrance door size does not leave a gap

Old-fashioned houses are generally equipped with anti-theft systems When decorating the door and the entrance door, it is easy to cause insufficient gaps between the floor and the door to accommodate thick and beautiful floor mats.

Designer’s tip: Before decoration, when measuring the size of the door, be sure to fully consider the thickness of the floor, floor tiles, floor mats, etc., and leave room for gaps in advance. If similar problems occur later, you can change to a thinner floor mat; or dig out a piece of floor according to the size of the floor mat, seal the edges and then put the floor mat in.

Misunderstanding 2: Not enough reserved sockets

Nowadays, there are more and more types of household appliances. During the original decoration, several more sockets were installed as needed. , it is no longer enough, and the hidden wiring used during decoration cannot be changed. Moreover, when designing the TV background wall, there are no reserved power sockets for wall-mounted TVs, speakers, etc., so only open wires can be connected at home, which not only affects the appearance, but also brings inconvenience to cleaning.

Designer’s tip: When decorating, consider the number of electrical appliances that need to be purchased in the future and install as many sockets as possible to prevent the sockets from not keeping up with the development of electrical appliances. If you use an LCD TV at home, it is best to leave a place for a wall-mounted power socket; if not, you can wrap some fake flowers on the open wire, which can also have a decorative effect.

Misunderstanding 3: The ceiling keel cannot bear the chandelier

When building the ceiling keel, we did not consider the future installation of heavier lighting such as crystal chandeliers. It was very simple, but when I finally installed the lights, I found that the ceiling couldn\’t bear the weight of the lights at all.

Designer’s solution: Either change to a lighting that can withstand the ceiling keel, or install a resin lamp similar to a crystal lamp. If you must install a crystal lamp, you can dig out the ceiling a little, add expansion bolts to the original top, then add hooks, and finally hang the lamps.

Myth 4: Not enough storage space

It is difficult to arrange enough storage space in a small kitchen, but the kitchen has the most clutter, and those who have a headache What should I do if my pots and pans have nowhere to hide? Stacking them on the stovetop is unsightly and inconvenient to use.

Designer’s solution: The kitchen must be convenient and practical, and small kitchens must have good space arrangements. If the base cabinets and wall cabinets are notIf it is enough, you can buy some suitable metal kitchenware shelves or brackets and install them on the wall to store microwaves, rice cookers, etc. on the wall. The shelves with hooks can also hang various spoons, knives and other sundries.

Mistake 5: Not leaving enough space for the refrigerator

When renovating the kitchen, I just left a random space without considering the size of the refrigerator, and later purchased it. The size of the refrigerator is either inappropriate or the appearance is not satisfactory.

Designer’s Hack: When a cabinet designer comes to measure the dimensions, he must provide him with the exact dimensions of various kitchen appliances. He must also fix their placement according to his own living habits, and then design the cabinets. size. If the kitchen and dining room are not far apart, you can place the refrigerator in the dining room; if they are farther apart, you can only buy a refrigerator of suitable size.

Myth 6: The water heater is exposed

The water heater is large. If it is exposed during decoration, it will not only take up space, but its intricate pipelines will also be very large. It affects the appearance and is inconvenient to take care of.

Designer’s hack: You can customize a cabinet with shutter doors to wrap the water heater, which is both beautiful and dust-proof and heat-dissipating. The louver door cabinet can be customized in the same style as the cabinet, and the overall effect will be better.

Myth 7: Wardrobe space only focuses on the front view

For apartments with only two bedrooms, most people only build large wardrobes in the two bedrooms and not Try to \”squeeze\” a separate space as a utility room. In the future, as the number of clothes increases, these two cabinets will definitely not be enough. In summer, the cabinets will be squeezed even harder.

Designer’s Hack: The future storage and storage functions of small apartments should be fully considered in the design stage. It is very popular nowadays to design an overall cloakroom or storage room in a limited space to meet future needs.

Myth 8: The ceiling light is not designed with dual controls

The switch for the bedroom ceiling light is only set at the entrance, and there is no double switch at the bedside. control switch. In this way, after watching TV or reading a book in bed at night, you still have to get out of bed to turn off the lights and then go into the dark to turn off the lights. This is even more annoying in the winter, when you are shivering with cold and have to get up to turn off the lights.

Designer\’s solution: If you have this special need, you can communicate with the master worker during the electrician stage of decoration and use a dual-connection and dual-control circuit. If you don\’t have a dual control circuit, you can still achieve the effect by going to a lighting store to buy remote control lamps.

Misunderstanding 9: The floor drain does not drain enough

This problem generally has two situations: one is that the floor drain outlet is not the lowest point, and the other is that the number of floor drains is not enough. . In this way, not only is it easy to cause the trouble of \”water overflowing\” when taking a bath, but even the washing machine may not be able to be used.

Designer’s solution: In view of the lowest point problem, you must remember to test the drainage when accepting the bathroom decoration. Otherwise, it will not only affect the bathroomIf the situation is serious, it will cause water leakage, causing harm to the neighbors downstairs. For the problem that there are not enough floor drains to use the washing machine, you can install a floor drain that can be used for both washing and drainage. Floor drains are usually installed under wash basins, shower areas, washing machines and toilets.

Myth 10: The height of the waterproof layer of the shower room is unreasonable

When some families are decorating, they would like to raise the waterproof layer of the shower area to the top in order to be waterproof. . Some families ignore the waterproofing problem and do not do it high enough, leaving hidden dangers of water seepage. The waterproofing of the bathroom cannot be ignored and must be done in place, but generally a height of 30 cm is enough. If it is too high, it will cause problems such as hollow walls and weak ceramic tiles. Moreover, the ceramic tile itself also has a certain waterproof effect, so there is no need to overdo it.

CCTV Finance (\”Consumer Advocacy\” reporter Luo Shu) Which item costs the most money to decorate a home? Many people recommend the floor first! There are three main types of wood flooring currently on the market: solid wood flooring, solid wood composite flooring and laminate flooring. \”Consumer Advocacy\” can help you advise and see which one is more suitable!

From a price point of view, solid wood flooring is far ahead. A \”Consumer Advocacy\” reporter saw in a decoration and building materials store in Beijing that the price of solid wood flooring made of longan was 500 yuan per square meter, and the price of solid wood flooring made of yahuali was 1,660 yuan per square meter. In the same store, , the price of mid-to-high-end laminate flooring is only more than 200 yuan per square meter.

The staff said that there are many factors that determine the price of solid wood flooring, and the prices of different materials vary greatly. The rarer the tree species, the more expensive the flooring is; even if it is the same material, because it is made from Different locations of the same tree will have different prices. In addition, factors such as product specifications, production technology, and brand will also affect the final price.

The \”Consumer Advocacy\” reporter learned from the flooring manufacturer that the production technology and process of solid wood composite flooring are the same as those of solid wood flooring. The biggest difference is the base material. Solid wood flooring is a whole piece of logs, while solid wood composite flooring is made of three or more layers of different solid wood. Since the layers of solid wood in solid wood composite flooring are arranged staggered according to the texture, they offset the same. The expansion and contraction tension of wood species is higher than that of solid wood flooring.

Generally speaking,the price of solid wood composite flooring is lower than that of solid wood flooring, while the price of laminate flooring is even lower, but from stable In terms of performance, laminate flooring deserves to be ranked first!

How is laminate flooring made? Industry insiders told the Consumer Advocate reporter that fast-growing forest is beaten into wood pulp and then glue is used to make high-density boards. This high-density board is reinforced. The base material of composite flooring disrupts the structure of the wood itself and increases the density, so it is more stable, but it also loses the feel of solid wood flooring, which makes it feel a little harder when you step on it. p>

As for the color of the laminate flooring, it all depends on the pattern paper. The pattern of the pattern paper is artificially designed and manufactured, and it can be made into whatever you need.

Patterned paper looks like paper, but it is actually aluminum oxide. It will melt on the surface of the patterned paper through high temperature. The wear resistance of the reinforced composite floor is relatively high, which is achieved through this layer of aluminum oxide.

\”Consumer Proposal\” summarizes the characteristics of three types of flooring for your reference:

Solid wood flooring maintains the natural color, texture and even aroma of wood, and is also relatively thick. Installing solid wood flooring looks classy and feels good on your feet. The disadvantage is that the wear resistance is relatively poor, the surface paint may be worn away over time, and the floor stability is relatively poor, and it is easy to shrink and warp due to drying and swelling. Solid wood floors made from tree species with long growth years and relatively dense texture are relatively stable and not easily affected by temperature and humidity, but the price is relatively high. In addition, the scarcity of tree species can also lead to higher prices.

The appearance of solid wood composite flooring is the same as that of solid wood flooring, and the feel is similar. It can also be used as a geothermal floor, and the price is between solid wood and laminate flooring. It has become the most popular in the market. New favorite.

Laminate flooring is still the best-selling variety in the flooring market because of its low price, wide variety of designs and colors, high wear resistance and good stability. However, because the pattern is printed, there will be repetition of the pattern. Unlike solid wood flooring, the pattern on each board is different.

I would also like to remind everyone that whether it is solid wood composite flooring or laminate flooring, glue is used as the base material of both, and there is a problem of formaldehyde release. Therefore, you should ask the seller for an authoritative test report when purchasing. Only those with qualified formaldehyde release can be used with confidence.