Decoration is a complicated and tedious process. If you don’t know how to decorate, you may take many detours in the first decoration, which will cause unnecessary waste. Especially for some owners who do not know what the requirements are for the first decoration, and they do not know what the decoration order is, which leads to many details not being done well, and in the end they will leave many regrets.

Today we will take a look at the experiences of those who have experienced it and summarized the construction requirements of the four stages of decoration for you. Let’s take a look together below.

The first phase of decoration: basic construction requirements for hydropower

(I) What are the key points of the hydropower stage?

To ensure reasonable wiring, no safety hazards should be left

The first stage is mainly water and electricity renovation, and the water and electricity are decoration. The key point is also a difficult point. If you cannot guarantee the construction of the plumber, then problems will easily arise during subsequent use. The most important thing for the plumber is to understand the switches and sockets of the waterways and lines in each room, and ensure that the circuits of each socket are It is usable, and there is no risk of water leakage in the pipes on the waterway.

During construction, plumbers will also wire according to the characteristics of each room, such as kitchens, bathrooms and air conditioning sockets. The refrigerator sockets should be separated and cannot share one socket to avoid excessive electricity use.

Do it well When accepting materials, you should not be greedy for small gains

Human and electricity materials are also the most easily overlooked stage in the entire decoration. Many owners do not pay attention to hydropower materials and think that they are hidden in the wall anyway. It can\’t be seen afterwards. In fact, this is a big hidden danger. If the material selection is not good, water leakage and electricity leakage will occur, and various problems will arise in the future, which will also bring us living. It has a significant impact, so we must pay attention to the selection and acceptance of hydropower materials.

(II) Pit avoidance suggestions in the hydropower stage

1. The refrigerator must be powered separately, and the socket cannot be shared.

The refrigerator socket cannot be shared with other electrical sockets. Let it use electricity alone to avoid the use of other electrical appliances. Excessive electricity causes the refrigerator to catch fire and damage, which will seriously affect our living safety.

2. Important electrical appliances need to be laid out in advance, they cannot In the water and electricity stage, in addition to laying out water pipes and wires, we must also make the socket layout in each room, so as to ensure the safety and convenience of subsequent electricity use. When laying out sockets, we should use a socket in the key areas of each room, such as the kitchen, bathroom, living room, bedroom lamps, TVs, air conditioners, etc. required sockets in advance. OK.

The second phase of decoration: What is the focus of the waterproofing project?

(1) Basic construction requirements for waterproofing

Ensure that the number of brushing is qualified and you cannot cut corners

The second stage is the waterproofing project that everyone is most afraid of. Every time when it comes to waterproofing, everyone has a helplessness. And the fear, because the waterproofing project is really easy to cut corners, we need to do a good job of waterproofing construction. The first thing is to ensure that the number of times the paint can meet the standard requirements. Only by ensuring the waterproof coating of floor drains, pipes and walls Only evenly cover our waterproofing can be done.

If you cut corners and apply it casually, then water leakage will be prone to subsequent problems.

Ensure that the waterproof height meets the standards and do not be lazy

The second is to ensure that the waterproof height meets the standards. If the plumber is lazy during construction and only applies a small piece of waterproof coating, it will lead to subsequent water leakage. Water will flow to our walls, affecting the aesthetics of the interior and affecting our living safety. Therefore, it is necessary to ensure that the waterproof height meets our decoration requirements.

(2) Pit avoidance suggestions in the waterproofing stage

tips①. Waterproofing must be conducted to ensure the waterproofing effect

The most important thing for the waterproofing worker after the construction is completed. It is necessary to conduct a closed water test. Only after a 48-hour closed water test can we determine whether our waterproofing effect is good. We can also use this method to check whether our waterproofing project is qualified to avoid water leakage in the later stage.

The third stage of decoration: What are the precautions for woodworking technology?

(I) Key requirements for woodworking stage

The key is to ceiling design, and the visual effect should be paid attention to

The third stage is woodworking technology, and for the construction of woodworking technology, the most important thing is to pay attention to ceiling design. If you don’t make a suspended ceiling, it will easily affect the beauty of the interior and the height of the interior.

When designing a suspended ceiling, you must also ensure that the shape and style of the suspended ceiling are in line with the overall shape of the house. The decoration style cannot be selected casually to avoid inappropriate ceilings affecting our interior. /p>

The key point is The wooden doors are installed on site to ensure the correct functional direction

Another key is to install wooden doors on site. Wooden doors are essential furniture for our homes. When installing, you must pay attention to the functional direction of the doors to ensure the doors. The location and direction are in line with our usage habits. Then, when installing, you must ensure that the gaps in the door are suitable and that too large gaps cannot affect our living safety and privacy.

(II) Tips for avoiding pits during the woodworking stage

tips①. Wooden doors should be measured in advance to avoid inappropriate installation

whether it is a suspended ceiling or The installation of doors requires measurement of size in advance. Although most furniture is now produced according to standard sizes, the size of our home spaces is also different. Standard sizes cannot be simply applied directly, such as the size of wooden doors. We should measure the size and width of the door opening in advance to avoid the inability to use the door function due to insufficient measurement or inappropriate measurement of the size, which directly affects our use.

Decoration Phase 4: Details and suggestions for tiles and pit avoidance

(I) Things to note in tiles

The key is to choose tiles to avoid buying inferior tiles

The last stage is the tiling process, and the tiling process mainly involves laying tiles. It seems simple, but there are many details in it. , for example, the choice of ceramic tiles is the key. We should choose the right tiles based on the home functions, such as the kitchen andAnti-slip tiles should be chosen in the bathroom, while polished tiles can be chosen in the living room, and glazed tiles can be chosen in the bathroom space, so as to ensure the functionality and aesthetics of each space.

The key is to lay the bricks, and it cannot be laid incorrectly or cracked

The tile laying process is relatively cumbersome, like the tile laying process It can also be divided into many details, such as looking at bricks, paving techniques, and cutting bricks. These links need to be completed by a professional construction team, and you cannot do them casually.

If you hire an unprofessional construction team and do not lay the bricks or lay them flat because you are lazy, then various safety hazards will arise in subsequent use. Influence our living experience.

If you don’t want to regret it later, it will affect our living experience, the most important thing is to check the construction details at every stage and see if the construction team has implemented it as required. Prevent problems later.

Decoration is a very long process. In this process, we must not only be patient, but also know the construction requirements of each stage, because the construction requirements of each stage are different, and we cannot generalize. , If we don’t know how to decorate, it is recommended that we ask a professional construction team to carry out the construction for us.