More and more people are about to be \”driven crazy\” by the decoration. One pit is connected to another, and each step is accurate.

Decoration, you may step into a trap if you are not careful.

Two days ago, I was chatting with friends. A friend said: I\’m going crazy with the decoration. The pits in my house are one pit after another, and I can\’t find the right one without stepping on it.

When decorating your home, you should indeed learn some avoidance Tips for avoiding pitfalls.

The decoration is not only ineffective, but also expensive, and it will also cause many problems, which makes us very troubled.

Sharing in this issue: Decoration pits that drive people crazy.

The full text is divided into seven parts: the background wall will fall off after a few days; the socket is ugly; the wardrobe door hits the floor; the wardrobe The upper handles are densely packed; the water in the shower room reaches the feet; the back panel of the balcony cabinet is broken when poked: the wall is bumpy.

(1) – The background wall will fall off after a few days

Netizen @decoration 30 days I have been paying attention to the decoration of my home. However, after only a few days of installation, I found that the stone background wall was peeling off. It was really scary.

I believe that many friends will consider the background wall when decorating. However, if the background wall is not installed well, it will fall off in a few days.

Background walls, many friends may have encountered pitfalls when decorating. Some spent high prices to make high-end background walls. However, after moving in, , I found that the more I looked at it, the more ugly it became.

What’s more, the background wall has some very complicated shapes that easily accumulate dust.

Guide to avoid pitfalls:

I advise everyone that there is no need to make the background wall too complicated. Simplicity doesn’t necessarily mean it doesn’t look good, the key is that it saves money and is durable.

(2) – The socket is ugly

<p style=\"margin-top: 8px;margin-left: 8px; margin-right: 8px;\" data-track=\"17\" The sockets installed in my home are uneven and the gaps on the left and right are different sizes. HowNo matter how ugly it looks, please don’t make serial sockets.

This According to the netizen\’s account, the size and height difference between the left and right sockets in his home were not properly controlled during the decoration, which made it particularly ugly.

This is also easier to step on during decoration A pit situation. Because many sockets are close together, it is necessary to control the gaps between the height and the left and right.

Because once the socket bottom box is left empty It was a perfect fit. When we installed the panel later, it was difficult to use the panel to make up for these size differences.

Finally, when installing the panel, It\’s possibleThere are different heights between the two panels. Some of the left and right panels are one centimeter, some are two centimeters, etc., and the sizes are different.

If two or three sockets are connected together, it is indeed very ugly.

Guide to avoid pitfalls:

We are required to reserve elastic wires for sockets when we renovate water and electricity. The left and right dimensions must be consistent.

(3) – The wardrobe door hits the floor

Netizen @咯shoot into bamboo has seen a wardrobe door hitting a bedside table. I wonder if you have ever seen a wardrobe door with a ceiling? This is a joke in my house. I didn’t pay attention at first, but after I moved in, When I opened the cabinet door, it got stuck on the top panel and had to be dismantled and redone. src=\”https://p3-sign.toutiaoimg.com/tos-cn-i-6w9my0ksvp/a3967d2b62a94cf29fb56db41b131903~tplv-tt-origin-web:gif.jpeg? _iz=58558&from=article.pc_detail&lk3s=953192f4&x-expires=1735866090&x-signature=p0J7cyNpytIzhbkJWe6rWaOL%2BMo%3D\”/>

Through this According to the discussion of a netizen, we will find that the size of wardrobe doors must be strictly controlled

As the size of bedrooms becomes smaller and smaller, many friends will consider the relationship between bedside tables and cabinet doors when decorating their bedrooms. This issue is often difficult to get into.

However, there is now a door-to-top wardrobe , that is, the Babel Cabinet, but it is very easyAnother problem arises, that is, after the cabinet door is opened, the top plate is scratched.

In fact, this also shows from another aspect that our top board is uneven or the wardrobe is uneven.

Guide to avoid pitfalls:

If you have a wardrobe with a ceiling, it is recommended that you leave a few centimeters at the top for sealing. Instead of opening the cabinet door directly to the top, it does not look good and will sink later, making it more likely to cause problems.

(4) – The wardrobe is densely packed with handles

Netizen @Evergreenshu wardrobe handles cannot be chosen randomly. I liked the little black handles, but didn\’t pay attention to the finished effect. After finishing the installation, I found that the wardrobe was filled with densely packed black handles, which was quite disturbing to look at. I just finished installing it but I don’t want to dismantle it. What to do?

This is a typical sign of stepping on the wardrobe door handle.

There are two types of handles for wardrobe doors: one is to install a metal handle, and the other is to be processed without a handle.

Some friends like these metal handles. However, you must be careful when choosing metal handles. Especially those with smaller sizes and more cabinet doors are generally prone to overturning.

If the wardrobe in our home is divided into drawers and segments, there will be many places where handles need to be installed. After installing the small black handles, it is really easy to get dense.

Guide to avoid pitfalls:

When choosing a wardrobe, try to look at the actual object or renderings. Never choose the handle directly. After installation, it is often different from what we imagined.

(5) – The water in the shower room has covered the feet

Netizen @ was tired of decorating. My house was decorated, but I couldn’t be happy after moving in. Every time I take a shower in the shower room, the water does not reach my feet and the water is not drained in time. What is the cause of this? How to solve it?

This A question asked by a netizen is about his shower room, The bathroom drains very slowly when taking a bath, and the water does not reach the feet every time. This feeling is indeed uncomfortable.

causes this problem One of the main reasons is the problem of our floor drain. The floor drain does not drain smoothly.

The more common problem is the long Although the upper drainage hole of the strip-shaped decorative floor drain is large, the lower drainage hole is still the drainage hole of a traditional floor drain.

In addition, after taking a shower, hair enters these drainage holes and blocks them, causing the water to not drain out in time.

When we discover this situation, we can only clean the floor drain in time, because we cannot dismantle and reinstall it.

Guide to avoid pitfalls:

For the floor drain in the shower room, it is recommended that you choose the traditional deep-water sealed floor drain. Not only does it have a good anti-odor effect, but the drainage is relatively smooth.

(6) – The back panel of the balcony cabinet will break when poked

Netizen @青青的草草The decoration was almost finished, and I thought I could finally breathe a sigh of relief. However, I discovered that the back panel of my balcony cabinet was made of 9mm boards, and I wanted to install perforated boards one by one. hole.

In fact, this question illustrates the problem of choosing different wardrobe backboards. Many friends have encountered pitfalls in this aspect.

If you have observed the wardrobe at home, in fact, the backboard of the wardrobe is basically a 9 mm thin plate.

However, for some lockers, since we need to install perforated panels for modification, the 9mm back panel will not work.

Balcony cabinet, if we plan to install perforated boards later, If it is a 9 mm thin plate, it is easy to make holes one at a time, making it impossible to hang.

In this regard, many friends have been through pitfalls and have learned lessons from them.

Guide to avoid pitfalls:

For cabinets that we need to modify later, such as balcony cabinets, housekeeping cabinets, etc., try to choose the same board as the cabinet board for the backboard, and inform the manufacturer in advance.

(7) – The wall is bumpy

Netizen @长长河 My house has another pit on the latex paint wall. You really can\’t see it during the day, but when you turn on the lights at night, it shines on the wall, and it\’s really uncomfortable to look at it.

This is a typical quality problem on latex paint walls. The latex paint walls are uneven and have bumps.

A good latex The painted wall surface should be very smooth and give people a very comfortable feeling.

But if the latex paint wall If you don\’t do it well, the unevenness will be very obvious under the light. Many friends fall into this trap.

A large part of the reason for the uneven paint wall surface is the putty on the bottom layer. The putty is notFlat, the topcoat is definitely not flat.

Guide to avoid pitfalls:

For latex paint walls at home, it is recommended that you control the putty layer. After polishing the putty layer, check the flatness and apply latex paint after it is qualified to avoid lumps.

The above is the [Home] topic of this issue. Thank you for reading and share it with more people! For more topics, please pay attention to \”Home Miscellaneous Forum\”. See you in the next issue!

[Original text, pictures from the Internet, will be deleted if infringement is reported]